Lct Feed Clutch Removal - Ricoh A095 Service Manual

Rev.1/20/94

5.2 LCT FEED CLUTCH REMOVAL

[D]
1. Remove the rear upper cover [A] (2 screws).
2. Disconnect the two connectors [B].
3. Remove the harness bracket [C] (2 screws).
4. Remove the bracket [D] with the LCT feed motor (3 screws).
5. Replace the LCT feed clutch [E] (2 Allen screws).
NOTE: When installing the LCT feed clutch, set the stopper pin on the
clutch in the cut-out [F] on the bracket.
A095/A096/A097
[A]
[B]
11-16
[F]
[C]
[B]
[E]
FSM