Table of Contents
Advertisement
SC731 - Abnormal bin drive (lift) motor movement
(A374, A377 sorter staplers)
Definition: [level: B]
If the wheel sensor (bin lift timing sensors) does not change 2 seconds after
the bin drive (lift) motor starts, jam "R2" is indicated.
If the condition above occurs twice, an SC is displayed.
Possible causes:
•
Wheel sensor (bin lift timing sensors) defective
•
Bin drive (Lift) motor defective
SC732 - Tray shift motor (A379 Finisher)
Definition: [level: B]
The shift tray half turn sensor does not detect the on (blocked) condition for 2
seconds after the finisher tray shift motor starts.
The first time, a jam is indicated. The 2nd time, an SC is displayed.
Possible causes:
•
Tray shift motor defective
•
Shift tray half turn sensor defective
SC733 - Shift tray lift motor (A379 finisher)
Definition: [level: B]
Stack height sensors 1 or 2 do not detect the on (blocked) condition for the
specified time after the finisher shift tray lift motor.
Possible causes:
•
Shift tray lift motor defective
•
Stack height sensor 1 or 2 defective
A095/A096/A097
6-20
FSM
Advertisement
Table of Contents
