Table of Contents
Advertisement
- Rear Long Helical Wheel -
[L]
[C]
[J]
[D]
[B]
[K]
1. Place the bearing [A] on the notch on the bottom plate then set timing
belt-426XL [B] and timing belt-918XL [C] around the pulley [D].
2. Set the helical wheel [E] into the pulley [D] then set the helical wheel on
the bushing [A].
3. Set the bracket with the bushing [F] on top of the helical wheel then
install and slightly tighten three screws [G].
4. Place a 0.4 mm thickness gauge [H] between the helical wheel [E] and
the bushing [F] on the bracket. While holding the bushing down to the
helical wheel, tighten the three screws [G].
5. Hook tension springs [I] and [J], then tighten screws [K] and [L].
FSM
[E]
[A]
[I]
[F]
0.4 mm
[E]
8-31
[G]
[H]
A095/A096/A097
Advertisement
Table of Contents
