Table of Contents
Advertisement
5
Set operation modes
Maximum copy input number The maximum copy quantity can be set from 1 to 999.
Panel beeper
Job End Call
Next
Image Density Level
Default Setting
Touch Panel in
Waiting Mode
FSM
Default: 999
The beeper (key tone) can be set to on or off.
default: ON
The beeper (job end call) sounds when your copying job
is finished, supplies (toner, paper) run out, or if a problem
occurs in the machine. The Job End Call can be set to on
or off
Default: ON
Auto and Manual Image Density levels can be adjusted to
be lighter or darker.
Default:
You can select Program No. 5 (see page 42) as a default
mode. Use it to store job settings you frequently use.
Default: Normal
You can select the animation display during the warm-up
period and copying run. During the warm-up period, the
remaining warm-up time is displayed. During copying,
you can see how long it takes to finish copying by
entering the number of originals with the Number keys
and Enter key. To exit the animation display, touch the
Exit key of the touch panel display.
Default: Reset (no animation display)
4-51
Prev.
(center)
A095/A096/A097
Advertisement
Table of Contents
