Table of Contents
Advertisement
Component
CN
(Symbol)
Duplex
Entrance Sensor
112-A7
(S-12)
Duplex Paper
End
112-A9
(S-13)
Duplex
Transport
109-A4
(S-14)
Exit
109-A2
(S-15)
Fusing Exit
109-B7
(S-16)
Paper Guide
109-B4
(S-17)
Auto Image
Density
507-1
(S-18)
Original
508-8, 9,
Length-1
10
(S-19)
Original
Length-2
509-3, 4, 5
(S-20)
Original Width
508-3, 4, 5
(S-21)
By-Pass Paper
Size
114-6
(S-22)
Toner Density
114-3
(S-23)
FSM
Condition
Symptom (when the main switch turns on)
Open
"Paper Jam T" indicator is displayed even if
there is no paper.
Shorted
Whenever a duplex copy is made, "Paper Jam
T" occurs.
Open
"Copies left in the duplex tray...." indicator is
displayed even if there is paper in the duplex
tray.
Shorted
Only one rear side copy is made regardless of
the quantity of copies.
Open
"Paper Jam T" indicator is displayed even if
there is no paper.
Shorted
Whenever a duplex copy is made, "Paper Jam
T" occurs.
Open
"Paper Jam E" indicator is displayed even if
there is no paper.
Shorted
Whenever the copy is fed out, "Paper Jam D"
occurs.
Open
"Paper Jam D" indicator is displayed even if
there is no paper.
Shorted
Whenever a copy is made, "Paper Jam C and
D" occurs.
Open
Shorted
Whenever a duplex copy is made, "Paper Jam
T" occurs.
Open
Image density will be abnormal.
Shorted
Open
The CPU cannot properly detect original size.
APS and AMS do not function correctly.
Shorted
Open
The CPU cannot properly detect original size.
APS and AMS do not function correctly.
Shorted
Open
The CPU cannot properly detect original size.
APS and AMS do not function correctly.
Shorted
Open
The CPU recognizes that the paper width is
319 mm regardless of the side fence position.
Shorted
The CPU recognizes that the paper width is
100 mm regardless of the side fence position.
Open
Machine quits auto toner supply mode and
enters fixed supply mode.
Shorted
6-25
–
A095/A096/A097
Advertisement
Table of Contents
