Ricoh A095 Service Manual page 498

[A]
[B]
10. Remove the rear cover [A] (4 screws) of the sorter stapler.
11. Couple the fiber optics cable connector [B] to DC1002 [C] on the Sorter
Stapler Main PCB.
12. Couple the fiber optics cable connector [D] and the connector [E] to the
mainframe.
13. Secure the protective earth wire [F] on the bracket [G] (1 protective earth
screw with spring washer).
14. To prevent the fiber optic cable being pinched by cover, round the fiber
optic cable through the wire saddles [H] three times as shown.
CAUTION: Do not bend the fiber optic cable.
FSM
[D]
[F]
[C]
12-11
[E]
[G]
[H]
A095/A096/A097