Table of Contents
Advertisement
Rev. 4/15/94
[A]
18. Remove the green plastic clip [A] from the staple cartridge, and install
the cartridge in the stapler.
NOTE: When installing the staple cartridge, make sure that all the staple
sheets [B] are in the initial position.
19. Plug in the copier.
20. Turn on the main switch of the copier and test the operation of the
finisher.
NOTE: The copier recognizes automatically that the finisher is installed.
The stapler will not be stapling for the first 10 or so copies until the first
staple comes to the proper position.
A095/A096/A097
[B]
10-12
FSM
Advertisement
Table of Contents
