Ricoh A095 Service Manual page 169

[A]
[C]
9. Remove the lens unit cover [A] (2 screws).
10. Unhook the tension spring [B].
11. Remove the lens shield plate [C].
NOTE: When installing the lens shield plate, set the rear part [D] of the
lens shield plate between the guides [E] as shown. Then set the
grooves on the guide pins [F] in the rail [G].
After reinstalling the tension spring, confirm that movement of
the lens shield plate is smooth.
A095/A096/A097
[D]
5-18
[B]
[E]
[F]
[G]
FSM