Table of Contents
Advertisement
12
Select ARDF/RDH modes
This user tool can be used only when your machine is equipped with the
dual job feeder (system A and B) or the recirculating document handler
(system C).
Original Count Display
Auto Paper Select
Thin Paper mode
(for machines with dual job
feeder only)
(system A or B)
Regarding User Tools No. 8, 9, 10, and 11, see the next page.
FSM
In the default setting, you can see the entered copy
quantity on the upper part of the copy counter and the
number of copies made on the lower part. You can
cancel this setting and see the number of originals to be
fed on the lower part of the copy counter. On the upper
part, you can see the number of copies made. To cancel
the default setting, select "Yes".
Default: No
In the default setting, the Auto Paper Select is not
selected when you set originals in the dual job feeder or
recirculating document handler. You can cancel this
setting.
Default: No
Use when changing the type of originals to be fed. Select
this function when you use thin originals (lighter than 53
2
g/m
, 14 lb).
Default: No
4-53
A095/A096/A097
Advertisement
Table of Contents
