Table of Contents
Advertisement
CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT6645/6655/6665
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT6645/6655/6665 Parts Catalogs. This information
should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
Old
Paper End Feeler
OLD PART NO. NEW PART NO.
A0966283
A0966174
A0966158
A0966190
A0966191
A0966342
A0966362
A0966360
A0966363
* DENOTES NEW ITEM
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
6645/6655/6665 - 049
PAPER END STOPPER, ETC... - For more
accurate side to side registration, the tray
stop position is now determined at the feed
roller side (right) rather than at the paper
trail edge side (left).
The shape of the Paper End Feeler (shown below) has been changed so that the
feeler is pushed up by the paper more securely when the paper tray slides in.
Also, the Paper Flattener on the front side has been changed to prevent the
paper from being caught when the paper tray is pulled out. The Middle Guide
Plate (not shown) has been reinforced to prevent it from being deformed.
New
DESCRIPTION
Cushion - Rear Plate
Paper Tray Stopper
Middle Guide Plate
Paper End Feeler
Paper Flattener
Paper Flattener
Paper Tray
Old
Old
Paper Flattener
QTY
INT
0
1
2
2
3
1
1
0
3
3
1
6
3
0
3
1
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
12/22/95
Paper Tray Stopper
Rear Plate
Rear Plate
Cushion
New
New
REFERENCE
PAGE
ITEM
100
41*
87
19
101
34
39
9
39
23
39
62*
er the S/N cut-in or
Continued...
Advertisement
Table of Contents
