1
SP ADJUSTMENT
PAGE 12
PAGE 13
A4/A3 VERSION
Item
Adjusts the staple position.
Adjusts the vertical
staple position.
Adjusts the horizontal
staple position.
(0.5 mm/step)
Changes the duplex positioning roller down timing for
both A4/A3 and LT/DLT version machines.
Changes the duplex positioning roller up timing to
adjust the paper buckle at the separation roller.
(5 ms/step)
FSM
NOTE: PAGE 15 is for factory use
only. PAGE 16 is an extra
page, it is not used.
PAGE 14
T/DLT VERSION
Function
4-15
Note
This mode affects only
the A377 Sorter Stapler
(horizontal and vertical)
and the A379 Finisher
(horizontal only).
Adjusts the timing so that
the paper leading edge
just touches the
separation belt without
any buckle.
A095/A096/A097