Table of Contents
Advertisement
6.2
FEED ROLLER REPLACEMENT
[A]
[E]
1. Turn "OFF" the main switch and open the feed cover [A].
2. Replace the guide mylars [B] (1screw each).
3. Remove the snap ring [C].
4. Slide the roller [D] to the rear.
5. Hold the feed roller [E] then slide the shaft to the front, then remove the
feed roller assembly as shown.
6. Remove the four snap rings [F], then remove the feed rollers.
7. Install the new feed rollers, then re-assemble the machine.
FSM
[B]
[F]
[C]
[D]
7-15
Rev. 1/20/94
A095/A096/A097
Advertisement
Table of Contents
