Platen Cover (Option) Installation - Ricoh A095 Service Manual

2.4 PLATEN COVER (OPTION) INSTALLATION

[H]
[G]
[A]
Install the optional platen cover as follows:
1. Install the sensor ass'y [A] which is an accessory of the platen cover [B]
as follows:
1) Connect the red connector [C] to the rear sensor [D].
2) Connect the white connector [E] to the front sensor [F].
3) Secure the sensor assembly with a screw [G].
2. Install the platen cover hooks [H].
3. Install the platen cover [B].
A095/A096/A097
[B]
[F]
[H]
[E]
3-14
[D]
[C]
FSM