Table of Contents
Advertisement
CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT6665
SUBJECT: LOWER PICK-UP GUIDE CUSHION
GENERAL:
Due to loose fit (mounting play) of the duplex paper end sensor, the sensor may not detect the guide plate.
To firmly position the sensor, a cushion has been added as shown below. This information should be
incorporated into all existing FT6665 Parts Catalog documentation.
Guide
Play
PART NUMBER
52052777
* DENOTES NEW ITEM
UNITS AFFECTED:
Not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
6645/6655/6665 - 053
Lower Pick-up Guide Cushion
DESCRIPTION
Cushion - Lower Pick-up Guide
0~0.5mm
Harness Cover
1~2mm
QTY
0 → 1
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
02/21/96
REFERENCE
PAGE
ITEM
75
53*
er the S/N cut-in or
Advertisement
Table of Contents
