[C]
18. Open the front door of the sorter stapler and swing the staple unit [A] up.
19. Remove the green plastic clip [B] from the staple cartridge [C] and
correct the position of the staple sheet [D] if necessary.
20. Install the cartridge in the stapler while holding the staple unit.
21. Set the staple unit at the original position, close the S/S front door, and
plug in the copier.
22. Turn on the copier main switch and test the operation of the sorter
stapler.
NOTE: The stapler will not be stapling for the first 10 or so copies until
the first staple comes to the proper position from the cartridge.
The copier automatically recognizes that the sorter stapler has
been installed.
FSM
[A]
12-13
[C]
[B]
[D]
A095/A096/A097