Jogger Plate Removal And Installation - Ricoh A095 Service Manual

6.3 JOGGER PLATE REMOVAL AND INSTALLATION

[A]
[E]
- Removal -
1. Remove the proof tray. (Refer to Exterior Cover Removal.)
2. Release the spring [A] of the upper jogger holder [B], then pull out the
jogger plate [C].
- Installation -
1. Insert the jogger plate through the upper holder [B].
2. Push down the jogger plate towards the lower holder [D].
3. Set the jogger plate in the lower holder [D].
4. Hook the spring [A] of the upper jogger holder to the stopper [E].
A095/A096/A097
[B]
[C]
8-18
[D]
FSM