Final Body And Finish Assembly; Pre-Body Mounting Steps; Trunk Aluminum - Factory Five Racing '33 Hot Rod Assembly Manual

 The body comes out of the mold with a wax release compound and a thorough cleaning with a wax
remover is the best way to begin this job.
 A lot of time and energy was spent on the mold so that the body work can be kept to a minimum.
 Allow the bodywork or repairs performed to sit for several days outside in the sun or at
elevated temperatures to allow the repair materials to cure before final paint.
 While the body is being painted there are parts that can be assembled.

Final body and finish assembly

Pre-Body Mounting Steps

Trunk Aluminum

Check all of the fuel line fittings on and near the fuel tank to make sure they are tight.
Install the front wall of the trunk.
605
www.factoryfive.com 508-291-3443