Radiator Hose - Factory Five Racing '33 Hot Rod Assembly Manual

Install a ring terminal on the black wire coming from the fan itself. Then connect this wire to the
thermostat sender which you just installed in the radiator. With this setup the fan will operate by
interrupting the ground to operate the fan. Make sure your grill/radiator is grounded. If you are having a
problem, run a ground wire to the radiator directly.

Radiator Hose


Hack saw, razor knife, 7mm socket, ratchet, masking tape

Cooling components
239
www.factoryfive.com 508-291-3443