Maintenance Procedure Of The Transfer/Separation Unit; Replacing The Transfer/Separation Unit - Konica Minolta bizhub PRO 920 Service Manual

Field Service Ver2.0 Aug.2005
3.9

Maintenance procedure of the transfer/separation unit

3.9.1

Replacing the transfer/separation unit

A. Periodically replaced parts/cycle
• Transfer/separation unit: Every 6,000,000 prints
B. Procedure
[2]
[1]
[1]
57gaf2c069na
[2] [3]
57gaf2c070na
1.
Pull out the toner supply unit thoroughly. (See
"3.7.1 Removing/reinstalling the photo conductor
section.")
2.
Pull out the ADU from the main body. (See "3.16.1
Cleaning the registration sensor (PS44).")
3.
Loosen 2 screws [1] and remove the transfer/sep-
aration unit [2].
Note
• Reinstall the transfer/separation unit [1] so
that the couplings [2] and [3] engage cor-
rectly.
4.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
55