Konica Minolta bizhub PRO 920 Service Manual page 127

Field Service Ver2.0 Aug.2005
[5]
[4]
[1]
[2]
[3]
57gaf2c131na
[1] [2]
57gaf2c132na
5.
Remove the pre-registration clutch (CL4, CL6,
CL8). (See "3.13.4 Replacing the paper feed
clutch (CL3, CL5, CL7)/pre-registration clutch
(CL4, CL6, CL8) (Trays 1, 2, 3).")
6.
Remove the connector [1].
Note
• When replacing the pre-registration roller /3
(tray 3), be sure to skip steps 7 to 9.
7.
Remove the 2 screws [2] and then remove the
paper lift unit [3].
Note
• When installing it, be sure to set the pin of the
shaft [4] to the coupling [5].
8.
Remove the 3 screws [1] and then remove the
positioning plate /Fr [2].
3. PERIODIC CHECK
95