Field Service Ver2.0 Aug.2005
[2]
[1]
[3]
[2]
[2]
[3]
57gaf2c159na
[1]
57gaf2c160na
[1]
57gaf2c161na
Note
• When removing the ribbon cable [1], bring
down the lock lever [3] of the connector [2] in
the direction shown in the drawing to release
the lock and pull out the ribbon cable.
• When installing the ribbon cable [1], check
the lock lever [2] to see if it is released. And
then insert it securely into the connector [3]
thoroughly while taking note that the conduc-
tor side of the ribbon cable comes to the
opposite of the lock lever.
• And then return the lock lever [1] to its origi-
nal position and lock the ribbon cable [2].
6. OTHERS
247