Maintenance Procedure (Periodical Check Parts); Replacing The Tray 2 Feed Roller - Konica Minolta Bizhub-C31P Service Manual

Field Service Ver. 1.0 Apr. 2008
3.4

Maintenance Procedure (periodical check parts)

3.4.1

Replacing the tray 2 feed roller

A. Periodically replacing parts/cycle
• Tray 2 feed roller: Every 300,000 prints
B. Procedure
1. Slide out tray 2.
[2]
[2]
[1]
[1]
[3]
A0EAF2C001DA
[2]
A011F2C002DA
3. Periodical check
2. Lock the media lift plate [1].
3. Snap off two C-rings [2], and remove
the bearing [3] at the front.
4. Snap off the C-ring [1], and remove
the feed roller [2].
9