Konica Minolta bizhub PRO 920 Service Manual page 366

10. TECH. REP. MODE
No. CSRC
parameter
(Z1)
085 54 FS shift motor
086 55 FS exit cont. motor
087 56 FS fold knife motor
088 57 FNS bypass solenoid
089 58 FNS gate solenoid
090 59 PI sheet feed clutch /U
091 5A PI feed roller unit /A
092 5B PI feed roller unit /B
093 5C PI rev rubber unit
094 5D PI torque limiter
095 5E PI sheet unit feed clutch /L
096 5F PI feed roller unit /A
097 60 PI feed roller unit /B
098 61 PI rev rubber unit
099 62 PI torque limiter
100 63 PI Registration clutch
101 64 Paper adjusting part
102 65 ZU punch motor unit
103 66 ZU punch unit
104 67 —
105 68 PK-503 unit
106 69 PK-504 unit
107 6A PK-505 unit
108 6B ADF pickup roller
109 6C ADF feed roller
110 6D ADF retard roller
111 6E ADF sub pick roller
112 6F ADF torque limiter
113 70 ADF SDF solenoid
334
Parts name Parts No.
12QR-361
12QR-361
120H8001
12QR-263
12QR-263
13QN8201
50BA-574
50BA-575
13QN-443
13QN4073
13QN8201
50BA-574
50BA-575
13QN-443
13QN4073
13QN8201
13LH1026
12GQ-417
14KB5001
14JA5001
13BX5001
15KJ-050
15KG-050
15KA-050
15KB-050
13GA4604
15AS4605
13GA4606
13GA4601
13GA-135
13GA8252
Field Service Ver2.0 Aug.2005
Count conditions
1 count each time an even number of
copies is exited in the sort mode.
1 count at the start of a job in the staple
mode large size (A4R, 8.5 x 11R or
larger), and 1 count for a paper exit.
1 count at the start of the saddle stitching
and folding jobs.
1 count for each paper exit in the saddle
stitching, folding and tri-folding modes.
1 count for each paper exit in the staple
mode A4, B5, 8.5 x 11 and 16K sizes.
1 count for each paper exit in the tri-fold-
ing mode.
1 count for each PI /Up paper feed.
1 count for each PI /Lw paper feed.
1 count for each PI paper feed.
1 count for each TU cut.
1 count for each ZU punch.
—
1 count for each PK punch.
Original feed count in all modes.
Original feed count in all modes.
Total original feed count in the single feed
mode.