Konica Minolta bizhub PRO 920 Service Manual page 432

10. TECH. REP. MODE
G. Baud rate setting
Note
• In case you changed bit data by accident, be sure to restore the previous state.
1.
"Modem setting menu screen"
Press the [Software SW Setting] key.
2.
"Software SW Setting screen"
Set "01" with the DIPSW number.
Set the modem baud rate using the DIPSW bit number "4 to 7".*
3.
Press the [Return] key to return to the "Modem setting menu screen."
* Modem baud rate
Baud rate
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
H. E-Mail initial setting
1.
"E-Mail Setting Menu screen"
Press the [Basic setting] key.
2.
"Basic setting screen"
Press the [Center No.] key.
3. Enter the center ID with the keyboard, and press the [OK] key.
4.
Press the [OK] key to return to the "E-Mail Setting Menu screen."
5.
"E-Mail Setting Menu screen"
Press the [Response time out setting] key. *
6.
Enter the response time out time with the numeric keys. (in minutes)
7.
Press the [OK] key to return to the "E-Mail Setting Menu screen."
Note
• The response time out setting is automatically set on receiving the initial connection mail. Change
the setting if necessary.
400
01-7 01-6 01-5 01-4
0 0 1 1
0 1 0 0
0 1 0 1
0 1 1 0
0 1 1 1
1 0 0 0
1 0 0 1
Field Service Ver2.0 Aug.2005