Konica Minolta bizhub pro 920 Copier Manual

Konica Minolta bizhub pro 920 Copier Manual

Hide thumbs Also See for bizhub pro 920:
Table of Contents

Advertisement

Copier
1 Precautions for Installation and Use
2 Preparation for Use
3 Paper and Original Information
4 Supplies & Handling
5 Troubleshooting
6 Maintenance
7 Specifications
8 Before Making Copies
9 Basic Job Settings
10 Original Setting
11 Applications
12 Finishing / Paper Fold
13 Job Management
14 Advanced Information
Index

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bizhub pro 920 and is the answer not in the manual?

Questions and answers

Summary of Contents for Konica Minolta bizhub pro 920

  • Page 1 Copier 1 Precautions for Installation and Use 2 Preparation for Use 3 Paper and Original Information 4 Supplies & Handling 5 Troubleshooting 6 Maintenance 7 Specifications 8 Before Making Copies 9 Basic Job Settings 10 Original Setting 11 Applications 12 Finishing / Paper Fold 13 Job Management 14 Advanced Information Index...
  • Page 3 PRO 920 Copier User’s Guide...
  • Page 5 90 minutes, 120 minutes or 240 minutes. Automatic Duplex Copying To reduce paper consumption, use this function to make double-sided (du- plex) copies, automatically. We recommend that you utilize the Low Power function, Sleep function, and Automatic Duplex Copying function. bizhub PRO 920...
  • Page 6 TAIN DOCUMENTS OR INFORMATION, RESULTING IN FINES OR IMPRIS- ONMENT FOR VIOLATORS. ACKNOWLEDGEMENTS: KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub PRO are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
  • Page 7 Composition of User’s Guide This machine is provided with the following user’s guides as printed matters. * bizhub PRO 920 User’s Guide - Copier (This book) This guide describes an outline of the machine and copy operations. Please refer to this guide for safety information, turning on/off the machine, paper supply, dealing with machine trouble such as paper jam, and copy op- eration available on the machine.
  • Page 8: Table Of Contents

    Finisher FS-604 (+ Punch Kit PK-505) ..........2-14 Post Inserter PI-501 ..............2-16 Z Folding Unit ZU-602 ..............2-17 Trimmer Unit TU-501 ..............2-18 Turning On/Off the Power Switch ..........2-20 To turn on the power ..............2-20 To turn off the power ..............2-23 bizhub PRO 920...
  • Page 9 Inserting a New Staple Cartridge into Finisher FS-604 ....4-24 To add staples ................4-24 Empty Trash Basket of Punch Kit PK-505 ........4-28 To empty trash basket ..............4-28 Empty Trash Basket of Z Folding Unit ZU-602 ......4-30 To empty trash basket ..............4-30 bizhub PRO 920...
  • Page 10 Cleaning Image Scanning Section ...........6-2 Cleaning the ADF Scanning Glass ..........6-2 Cleaning the Original Glass ............6-3 Cleaning the ADF Guide Cover ............6-3 Checking Copy Count ...............6-4 To check and print the counter list ..........6-4 Preventive Maintenance ..............6-6 bizhub PRO 920...
  • Page 11 Large Capacity Unit LU-404 ............7-7 Z Folding Unit ZU-602 ..............7-8 Trimmer Unit TU-501 ..............7-9 Before Making Copies Features of the bizhub PRO 920 ............8-2 Basic Functions ................8-2 Combine Originals ................8-2 Original Image Type ............... 8-3 Applications ...................
  • Page 12 Copying Mixed Size Originals (Mixed Original) ......10-12 Copying Z-Folded Originals (Z-Folded) ........10-14 Feeding Single Original from ADF (Single Feed) ......10-16 Procedure in normal Single Feed mode ........10-16 Procedure in Auto Start mode ............10-18 Copying Non-Standard Size Originals (Custom Size / Tab Paper) ..10-21 bizhub PRO 920...
  • Page 13 11.14 Reducing Images to Create Binding Margin (Page Margin: Reduce & Shift Mode) ..................11-50 To set Reduce & Shift mode of Page Margin ......11-51 11.15 Eliminating Black Copy Marks Along Borders (Frame/Center Erase) 11-53 To set Frame/Center Erase function .......... 11-53 bizhub PRO 920...
  • Page 14 Folding Copies in Three (Letter Fold In / Letter Fold Out) ..12-19 To fold copies in three ..............12-19 12.7 Output Z-Folded Copies (Z-Fold) ..........12-21 To make Z-folded copies ............12-21 12.8 Punching File Holes in Copies (Punch) ........12-23 To punch file holes in copies ............12-23 bizhub PRO 920...
  • Page 15 Checking Incomplete Jobs ............13-7 To check incomplete jobs ............13-7 To Check/Operate Suspended Jobs ........... 13-8 Job operation for suspended jobs ..........13-8 To Check/Control Spool Jobs ........... 13-10 Job operation for spool jobs ............13-10 bizhub PRO 920...
  • Page 16 Adjusting Response Time of Touch Keys (Accessibility) ...14-19 To adjust response time .............14-19 14.7 Adjusting Touch Panel Contrast (Contrast) ........14-20 To Adjust Contrast ..............14-20 14.8 Controlling Copier from Browser (Remote Panel) .....14-22 To control copier from browser ..........14-22 15 Index bizhub PRO 920...
  • Page 17: Precautions For Installation And Use

    Precautions for Installation and Use...
  • Page 18: Safety Information

    This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A solid circle indicates an imperative course of action. This symbol indicates you must unplug the device. bizhub PRO 920...
  • Page 19 Should any of these conditions be found, im- mediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. bizhub PRO 920...
  • Page 20 Overload could result in a fire. CAUTION • The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. bizhub PRO 920...
  • Page 21 Dust that accumu- lates between the plug terminals may cause a fire. Grounding WARNING • Connect the power cord to an electrical outlet that is equipped with a grounding terminal. bizhub PRO 920...
  • Page 22 • Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. bizhub PRO 920...
  • Page 23 When checking the inside of the unit for mal- functions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a “Caution HOT” cau- tion label. bizhub PRO 920...
  • Page 24 If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. Before successive holidays CAUTION • Unplug the product when you will not use the product for long periods of time. bizhub PRO 920...
  • Page 25: Regulation Notices

    Om apparaten används på annat sätt än I denna bruksanvisning specificer- ats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 775 - 800 nm. bizhub PRO 920...
  • Page 26: Ozone Release

    The use of non-shielded cables is likely to result in interfer- ence with radio communications and is prohibited under 89/336/EEC rules. For German Users Maschinenlärminformations -Verordnung - 3. GSGV, 18.01.1991: Der arbeitsplatzbezogene Immisionswert betraegt 70 dB(A) oder weniger nach ISO 7779. 1-10 bizhub PRO 920...
  • Page 27: Caution Labels And Indicators

    DO NOT put your hand Class IIIb Laser Diode that between the main body emits an invisible laser and developing fixing beam. The cover should unit; otherwise you may not be opened under any be injured. circumstances. bizhub PRO 920 1-11...
  • Page 28 Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave your hand on the printed sheets while the primary (main) tray goes up. 1-12 bizhub PRO 920...
  • Page 29: Installation Space

    Allow sufficient space for facilitating copy operation, changing parts, and pe- riodic inspection. Leave an adequate space behind the machine to let hot air out from the rear fan. Unit : Inches (mm) Main body + DF-606 + FS-509/516 + LU-403 (Front) Main body (Right side) bizhub PRO 920 1-13...
  • Page 30 Finisher tray of Finisher FS-509/516/604 gradually goes down while print- ed materials output. DO NOT allow any object to interfere with the oper- ation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. 1-14 bizhub PRO 920...
  • Page 31: Operation Precautions

    - Do not use paper with staples or paper that conducts electricity (silver, carbon, etc.), otherwise an accident may occur as a result of fire. - To avoid machine trouble, do not use heat-sensitive paper, colored OHP transparencies, or paper specifically designed for ink-jet printer, such as photo-paper. bizhub PRO 920 1-15...
  • Page 33: Preparation For Use

    Preparation for Use...
  • Page 34: Machine Configuration

    Preparation for Use Preparation for Use Machine Configuration External Machine Items bizhub PRO 920...
  • Page 35 Post inserter PI-501 (option) Used together with FS-509/516/604, loads cover sheet paper to feed it as cover, and enables to use Finisher manually. Touch panel Displays interactive operation screens. Control panel Controls copier operations and displays messages as required. bizhub PRO 920...
  • Page 36: Internal Machine Items

    Fuses the toner onto the copy paper. Main power switch Used only by service representative turns machine power on/off when pressed. 7 CAUTION The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. bizhub PRO 920...
  • Page 37: Standard/Optional Equipment

    Post inserter PI-501 Image controller IC-203 PostScript kit PS-503 Expanded memory unit EM-701 Finisher FS-509/516 Large capacity unit bizhub PRO 920 main body LU-403 Finisher FS-604 Large capacity unit LU-404 Z folding unit ZU-602 Mount kit MK-707 Trimmer unit TU-501...
  • Page 38: Control Panel Layout

    Press to store the image data in HDD of the main body or on a PC over a network, or to recall the stored data. The indicator of the key will light when pressed. For details, see bizhub PRO 920 User’s Guide - Network Scanner. [Scan] key Press to scan the original images, or to specify the address for data transmission.
  • Page 39 Stop the operation to prevent any unexpected accident. Write down the report code, then switch off the machine and disconnect from the power socket. Contact your service representative and inform them of the report code. bizhub PRO 920...
  • Page 40: Basic Screen

    The Basic Screen can also be changed to the direct selection screen, which allows you to view other basic settings while making a setting change. For details, contact your service representative. Layer selection screen: Direct selection screen: bizhub PRO 920...
  • Page 41 If the direct selection screen is specified as the Ba- sic Screen, this area displays the previous or cur- rent job information only. Switching to the illustrational information is unavailable, as in the user setting provided for the layer selection screen. bizhub PRO 920...
  • Page 42: Large Capacity Unit Lu-403/Lu-404

    Pressed to lower the bottom plate to allow paper loading. Bottom plate Goes up automatically when paper supply becomes low, and goes down when the paper loading button is pressed. Rear stopper Fixes the rear end of copy paper. 2-10 bizhub PRO 920...
  • Page 43: Finisher Fs-509/516 (+ Punch Kit Pk-505)

    The Primary (Main) tray gradually goes down while printed materials out- put. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. bizhub PRO 920 2-11...
  • Page 44 Preparation for Use Finisher FS-509 + Punch Kit PK-505 Finisher FS-516 + Punch Kit PK-505 2-12 bizhub PRO 920...
  • Page 45 Holds waste paper punched out and withdrawn for re- moval of waste paper. Stacker unit handle Withdraws the unit to allow clearing mishandled paper or replenishing staples. Cartridge housing Holds staple cartridge and to be removed from the stacker unit when replenishing staples. bizhub PRO 920 2-13...
  • Page 46: Finisher Fs-604 (+ Punch Kit Pk-505)

    The Primary (Main) tray gradually goes down while printed materials out- put. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. 2-14 bizhub PRO 920...
  • Page 47 Holds waste paper punched out and withdrawn for re- moval of waste paper. Stacker unit handle Withdraws the unit to allow clearing mishandled paper or replenishing staples. Cartridge housing Holds staple cartridge and to be removed from the stacker unit when replenishing staples. bizhub PRO 920 2-15...
  • Page 48: Post Inserter Pi-501

    Hold cover sheets to fix the position. Cover sheet feeder (upper) Holds cover sheets. Cover sheet feeder (lower) Holds cover sheets to be used for manual opera- tion. Lower tray paper guides Hold cover sheets to fix the position. 2-16 bizhub PRO 920...
  • Page 49: Z Folding Unit Zu-602

    Turned to ease removal of mishandled paper. Handle Can be withdrawn to allow removal of mishandled paper. Outlet lever Opens to allow removal of mishandled paper. Trash basket Holds waste paper punched out and withdrawn for removal of waste paper. bizhub PRO 920 2-17...
  • Page 50: Trimmer Unit Tu-501

    Excessive weight applied to the inside or outside of the trimmer stacker will damage the equipment. DO NOT use the stacker for storage. The tray inside the stacker slides to the left while finished sets are delivered; impeding the movement may cause an unexpected trouble. 2-18 bizhub PRO 920...
  • Page 51 Can be turned to ease removal of mishandled pa- per. Trash basket Holds waste paper cut off from the booklets and withdrawn for removal of waste paper. Trimmer pressure release lever Opens to allow removal of mishandled paper. bizhub PRO 920 2-19...
  • Page 52: Turning On/Off The Power Switch

    When the main power switch is turned on, the Main Power indicator on the control panel will light in green. Turn ON the sub power switch. – The sub power switch is located on the right side of the control panel. 2-20 bizhub PRO 920...
  • Page 53 Warmup takes approx. 5.5 minutes. During warmup, the message “Ready to copy reserve” will be dis- played in the message area of the Basic Screen. When printing job becomes available, the message “Ready to copy” will be displayed. bizhub PRO 920 2-21...
  • Page 54 User Authentication or Account Authentication may be required to operate the machine. See page 2-30 for details. Administrator can set the machine to display seven types of warmup screen during warmup. For details, see page 3-19 of POD Administrator’s reference. 2-22 bizhub PRO 920...
  • Page 55: To Turn Off The Power

    Be sure not to turn off the main power switch in usual operation. When turning the main power switch off then on, be sure to wait 10 sec- onds or longer before turning it on again; otherwise the machine may not operate properly. bizhub PRO 920 2-23...
  • Page 56: To Use Machine When Power Save Led Lights

    If Weekly Timer has been activated, the Basic Screen will appear with the message “Timer interrupt mode / Please input password” displayed in the message area, and the machine operation will be available temporarily by the Timer Interrupt function. See page 2-28 for details. 2-24 bizhub PRO 920...
  • Page 57: Low Power

    To start a copying job, press [Power Save]. The copying operation will become available. Detail The Sleep can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120 min- utes/ 240 minutes, or can be deactivated. For details, see page 4-12 of POD Administrator’s reference. bizhub PRO 920 2-25...
  • Page 58: Using Power Save Manually

    Press key/screen to cancel Using Low Power: Entry Low Power mode, after 10 second Press key/screen to cancel Power Save will be activated. The [Power Save] LED will be lit and the touch panel will be turned off. 2-26 bizhub PRO 920...
  • Page 59 Press Power Save continuously more than one second for low power mode Detail The machine is initially set to activate the Sleep function manually. To use Low Power instead, see page 4-12 of POD Administrator’s reference. bizhub PRO 920 2-27...
  • Page 60: When Weekly Timer Is Activated

    % Continue by entering the valid 4-digit password. Set the hour for the interrupt use, then press [Start]. – Enter a 1-digit hour (ex. 3 for 3 hours) using the control panel keypad. (0 ~ 9) 2-28 bizhub PRO 920...
  • Page 61 When the machine operation is finished, press [Power Save] for one second or longer, then release it. The machine returns to OFF condition. Detail For various settings of the Weekly Timer function, see page 4-16 of POD Administrator’s reference. bizhub PRO 920 2-29...
  • Page 62: Making Authentication

    Touch the desired item key to display the keypad screen. Enter your user name (Max. 64 characters), user password (Max. 64 characters), account name (Max. 8 characters) and/or 8-digit account password. Touch [OK]. Check that the screen message changes to “Ready to copy.” 2-30 bizhub PRO 920...
  • Page 63 When machine operation is completed, press [Access]. The initial state will be restored, with the User Authentication Screen displayed on the touch panel. Detail Contact your administrator if the message "Copy limit reached" is dis- played and machine operation becomes unavailable. bizhub PRO 920 2-31...
  • Page 65: Paper And Original Information

    Paper and Original Information...
  • Page 66: Paper Information

    ) (for Fold&Staple mode only) Post inserter PI-501 13 to 53 lb (200 g/m Punch kit PK-505 16 to 34 lb Z folding unit ZU-602 16 to 24 lb Trimmer unit TU-501 16 to 28 lb + 53 lb (200 g/m bizhub PRO 920...
  • Page 67 See page 4-9 for loading tabbed sheets in main body trays and Multi- sheet bypass tray. Reminder The tray specified as Tab paper cannot be used in duplex copying. Be sure to load only the paper type specified for that tray such as Thick, Thin, or Tab paper. bizhub PRO 920...
  • Page 68: Tray/ Exit Tray Capacity

    100 sets max. for 2~5-sheet-folded booklet 50 sets max. for 6~10-sheet-folded booklet 32 sets max. for 11~16-sheet-folded booklet * Maximum number of folded sheet is 3 for Half Fold and Trimming, and 16 for Fold&Staple and Trimming. bizhub PRO 920...
  • Page 69 Primary (Main) tray capacity Number of Z-folded sheets Number of regular sheets 1 sheet 1 ~ 40 sheets 20 stapled sets 2 sheets 0 ~ 30 0 ~ 20 0 ~ 10 6 or more Staple is unavailable with Z-Fold. bizhub PRO 920...
  • Page 70 2 ~ 9 150 sets 50 sets 10 ~ 20 21 ~ 30 31 ~ 40 41 ~ 50 51 ~ 60* 61 ~ 100* * Available only on Finisher FS-509 with 100-sheet-staple cartridge and on FS-516. bizhub PRO 920...
  • Page 71: Paper Size

    Max. 12.36”×18” (314 × 458 mm) ~ min. 3.94”×5.83” (100 × 148 mm) Finisher FS-604 Max. 12.36”×18.11” (314 × 460 mm) ~ min. 3.94”×5.83” (100 × 148 mm) (8.5”×11”, A3, B4, A4R only in Half Fold and Fold&Staple modes) bizhub PRO 920...
  • Page 72 B5: 7.17"×10.11" (182 × 257 mm) A5: 5.85"×8.27" (148 × 210 mm) Detail When setting wide size to the Multi-sheet bypass tray, be sure to specify the precise dimensions of paper to be used. See page 9-15 for details. bizhub PRO 920...
  • Page 73: Special Paper In Multi-Sheet Bypass Tray

    - Store paper in a cool, dry area. Using damp copy paper may cause a pa- per misfeed. Keep partially used packages tightly wrapped during storage. - Do not place paper packages vertically to store. Paper curl due to the vertical storage may cause a paper misfeed. bizhub PRO 920...
  • Page 74: Original Information

    - Original placement: Face down on left depth side of glass 7 CAUTION Do not place too heavy originals, or do not press strongly when thick original is placed and is under pressure of ADF The glass may be broken and you may be injured. 3-10 bizhub PRO 920...
  • Page 75 5.5”×8.5”R. See page 4-50 of POD Administrator’s reference. Detectable paper size can be changed from Inch to Metric, Metric A Size Paper, or Full Size by the administrator. See page 4-50 in the POD Ad- ministrator’s reference. bizhub PRO 920 3-11...
  • Page 76: Adf Originals

    - Max. feeder capacity: 100 sheets (20 lb) - Feeding tolerance: 5 times or less (single-sided) / 3 times or less (double- sided) See below for the guide width of each combination. 8.5"× 5.5"× Guide width 8.5"×11" 11"×17" Guide width 11" 8.5" 8.5"×14" 3-12 bizhub PRO 920...
  • Page 77 ) (single-sided) / 13 ~ 45 lb (double- sided) - Curling tolerance: 0.39" (10 mm) or less - Max. feeder capacity: 1 sheet at a time - Feeding tolerance: 5 times or less (single-sided) / 3 times or less (double- sided) bizhub PRO 920 3-13...
  • Page 79: Supplies & Handling

    Supplies & Handling...
  • Page 80: Loading Paper

    To display the Machine Status Screen, touch [Job List] on the Basic Screen, then touch [Machine] on the Job List Screen. The paper level is indicated by the five indicator types: Follow the procedure below to supply the empty tray with copy paper. bizhub PRO 920...
  • Page 81 Detail Printing job can be continued using paper in another tray even if the Ma- chine Status Screen is displayed due to the emptied tray. See page 5-7 for details. bizhub PRO 920...
  • Page 82: Loading Paper In Tray 1, 2, And 3

    0 Be sure that the machine is powered ON before withdrawing the tray. 0 Only one tray can be withdrawn at a time. Withdraw the tray to be supplied with paper. – Be sure to withdraw the tray completely until it stops. Open the paper feed roller. bizhub PRO 920...
  • Page 83 Changing paper size of the main body tray does not require any specific setting change, if standard size has been specified for that tray. if not, en- ter the Utility Screen to change the size setting. See page 1-2 of POD Ad- ministrator’s reference. bizhub PRO 920...
  • Page 84: Loading Paper In Multi-Sheet Bypass Tray

    Load copy paper, and adjust the paper guides to the paper size. When copying is completed, close the Multi-sheet bypass tray. Detail The special paper type and size should be specified when loading it in the Multi-sheet bypass tray. See page 9-15 for details. bizhub PRO 920...
  • Page 85: Loading Paper In Lcu (Lu-403/Lu-404)

    Fan the unwrapped paper, then load it into the LCU with the paper curl turning downward. LU-404 LU-403 Repeat the steps 2 and 3 until the bottom plate will not go down any more. Close the LCU top door. bizhub PRO 920...
  • Page 86 Be sure to fan paper before loading; it may improve feeding ability of the machine. Do not load above the limit line on the side guide plates. Be sure that the rear stopper is correctly positioned according to the pa- per size to be loaded; otherwise machine trouble may occur. bizhub PRO 920...
  • Page 87: Loading Tabbed Sheets In Tray

    Place the tabbed sheets on the tray as illustrated above. Move the side guide plates and rear guide to the edge of the paper. Close the paper feed roller, then push in the tray until it locks into place. bizhub PRO 920...
  • Page 88: Loading Tabbed Sheets In Lcu (Lu-403/Lu-404)

    Load the tabbed sheets into the LCU as illustrated above. Close the LCU top door. Detail To load the tabbed sheets into LCU, contact your service representative to position the rear stopper for the paper size to be loaded. 4-10 bizhub PRO 920...
  • Page 89: Loading Tabbed Sheets In Multi-Sheet Bypass Tray

    Load tabbed sheets as illustrated above. Adjust the paper guides to the paper size. Specify the paper type for the Multi-sheet bypass tray. Detail See page 9-15 for specifying the paper type of the Multi-sheet bypass tray. bizhub PRO 920 4-11...
  • Page 90: Adding Toner

    7 WARNING Do not throw the empty toner bottle into a fire. If it is thrown into a fire, the toner may ignite and cause a dangerous situation. 4-12 bizhub PRO 920...
  • Page 91: To Exchange Toner Bottle

    Open the machine front door, then pull out the toner unit 90 degrees to the right. Pull forward the lever on the left side of the toner unit until it stops. Remove the empty toner bottle. bizhub PRO 920 4-13...
  • Page 92 Set the new toner bottle into the toner unit, positioning the hollow part of the toner bottle on the top. – Be sure to set the hollow part of the toner bottle upward, otherwise the machine trouble may occur. 4-14 bizhub PRO 920...
  • Page 93 Supplies & Handling Push the lever backward until it stops. Return the toner unit to its original position, then close the machine front door securely. bizhub PRO 920 4-15...
  • Page 94: Inserting A New Staple Cartridge Into Finisher Fs-509

    When inserting the new staple cartridge, do not remove the staples re- maining inside the housing; otherwise the first sheet output after the re- plenishment will not be stapled. To add staples Open the Finisher door. 4-16 bizhub PRO 920...
  • Page 95 Pull up the knob of the cartridge housing, then remove it while pull- ing it forward. Open the bottom of the cartridge housing while pressing two locks on both sides, then remove the empty cartridge from the cartridge hous- ing. bizhub PRO 920 4-17...
  • Page 96 Remove the lock tape from the cartridge, then close the bottom of the housing. Insert the cartridge housing, then push in and down to secure it in place. 4-18 bizhub PRO 920...
  • Page 97 Supplies & Handling Return the stacker unit to its original position. Close the Finisher door. bizhub PRO 920 4-19...
  • Page 98: To Add Staples

    When the staple cartridge of the finisher becomes empty, the Basic Screen displays the message “Open the Finisher door / Please add staples.” Follow the procedure below to add staples. To add staples Open the Finisher door. 4-20 bizhub PRO 920...
  • Page 99 Hold the knob of the staple cartridge, then pull it downward to re- move it. Set a staple roll to the staple cartridge. – Open the cartridge cover, then set a staple roll into the cartridge. bizhub PRO 920 4-21...
  • Page 100 Close the cartridge cover, then remove the lock tape while pulling it horizontally. Insert the staple cartridge as shown in the illustration, then push it up firmly to secure it in place. Return the stacker unit to its original position. 4-22 bizhub PRO 920...
  • Page 101 Close the Finisher door. Reminder When removing lock tape from the staple roll, DO NOT pull it upward; otherwise the tape may be broken and remain inside the cartridge, so that copied sets cannot be stapled. bizhub PRO 920 4-23...
  • Page 102: To Add Staples

    When inserting the new staple cartridge, do not remove the staples re- maining inside the housing; otherwise the first sheet output after the re- plenishment will not be stapled. To add staples Open the Finisher door. 4-24 bizhub PRO 920...
  • Page 103 Pull out the stacker unit slowly by holding the stacker unit handle until it stops. Remove the cartridge housing. – Pull up the knob of the cartridge housing, then remove it while slid- ing it along the stapler rail. Remove the empty cartridge from the cartridge housing. bizhub PRO 920 4-25...
  • Page 104 Insert the cartridge housing while sliding it along the stapler rail, then push down and in to secure it in place. Return the stacker unit to its original position. 4-26 bizhub PRO 920...
  • Page 105 Supplies & Handling Close the Finisher door. bizhub PRO 920 4-27...
  • Page 106: Empty Trash Basket Of Punch Kit Pk-505

    Punch mode has been specified. Before setting punch mode, be sure to check the waste paper inside the trash basket, and empty the trash basket if needed. To empty trash basket Open the Finisher door. 4-28 bizhub PRO 920...
  • Page 107 Supplies & Handling Withdraw the trash basket. Empty the trash basket. Return the trash basket to its original position, then close the Finisher door securely. bizhub PRO 920 4-29...
  • Page 108: Empty Trash Basket Of Z Folding Unit Zu-602

    Before setting Punch mode, be sure to check the waste paper inside the trash basket, and empty the trash basket if needed. To empty trash basket Open the Z folding unit front door with the Finisher door handle. 4-30 bizhub PRO 920...
  • Page 109 Supplies & Handling Withdraw the trash basket. Empty the trash basket. Return the trash basket to its original position, then close the Z folding unit front door securely. bizhub PRO 920 4-31...
  • Page 110: Empty Trash Basket Of Trimmer Unit Tu-501

    Trimming mode has been specified. Before setting Trimming mode, be sure to check the waste paper inside the trash basket, and empty the trash basket if needed. To empty trash basket Open the Trimmer unit front door. 4-32 bizhub PRO 920...
  • Page 111 Supplies & Handling Withdraw the trash basket. Empty the trash basket. Return the trash basket to its original position, then close the Trimmer unit front door securely. bizhub PRO 920 4-33...
  • Page 113: Troubleshooting

    Troubleshooting...
  • Page 114: If "Please Call Service" Message Is Displayed

    Make note of the report code number indicated in the right side area of the screen. Turn OFF the sub power switch and main power switch. Unplug the machine. Contact your service representative and report the condition and report code number. bizhub PRO 920...
  • Page 115: Limited Use Of The Copier In Trouble

    Turn OFF then ON the sub power switch. A copying job can continue without using the troubled portion of the machine (ex. Tray 2). 7 CAUTION Limited use of the copier is completed. BE SURE TO CONTACT YOUR SERVICE REPRESENTATIVE IMMEDI- ATELY. bizhub PRO 920...
  • Page 116: Clearing Mishandled Paper

    Before performing the clearing procedure, see page 1-11 for the caution label locations inside the machine. To remove mishandled paper Touch [Illustration] on the screen. The screen illustrating the method for the disposal action will be dis- played. bizhub PRO 920...
  • Page 117 Be especially careful not to put your hand into the fixing unit area when withdrawing the fixing conveyance unit to remove mishandled paper. 7 CAUTION When removing stuck staples Be careful of removing staples stuck inside the machine so as not to get injured. bizhub PRO 920...
  • Page 118: If [Job List] Changes To [Mishandled Paper] Or [No Paper]

    Touch [Mishandled Paper] to display the Jam Position Screen, then follow the procedure on page 5-4 to remove mishandled paper. If [Job List] Changes to [No Paper] The selected tray has become empty. bizhub PRO 920...
  • Page 119: To Change The Tray Selection

    Touch [No Paper]. The Machine Status Screen will be displayed. Touch [Details]. The tray selection will be available on the Machine Status Screen. Touch the desired tray key, then touch [OK]. The Machine Status Screen will be restored. bizhub PRO 920...
  • Page 120 Troubleshooting Press [Start] on the control panel. Copy paper will be delivered from newly selected tray to continue the printing operation. bizhub PRO 920...
  • Page 121: To Supply The Empty Tray With Paper

    Check the empty tray number, then load paper. Touch [Close] to restore the Basic Screen. Press [Start] on the control panel. Printing operation will resume using the tray supplied with paper. Detail For details of loading paper, see page 4-2. bizhub PRO 920...
  • Page 122: If Memory Full Message Is Displayed (Memory Overflow)

    Occasional memory overflow may occur if the installed memory is inade- quate for the copy conditions selected, and the machine will stop its opera- tion with the following popup screen displayed. Touch [Stop]. All the scanned data will be cleared to terminate the job. 5-10 bizhub PRO 920...
  • Page 123: If Power Off/On Screen Is Displayed

    When any trouble affects the electrical signal of the copier, “Please turn the copier OFF” message will be displayed on the touch panel. Follow the procedure below to turn the machine power off then on. To turn off/on the power Turn OFF the sub power switch. bizhub PRO 920 5-11...
  • Page 124 Troubleshooting Turn OFF the main power switch. Wait about 10 seconds or longer. Turn ON the main power switch and sub power switch. 5-12 bizhub PRO 920...
  • Page 125: If No Response Screen Is Displayed

    When any trouble occurs on the printer board, “No Response from Printer Board” message will be displayed on the touch panel. Follow the procedure below to turn the machine power off then on. To turn off/on the power Turn OFF the sub power switch. bizhub PRO 920 5-13...
  • Page 126 Troubleshooting Turn OFF the main power switch. Wait about 10 seconds or longer. Turn ON the main power switch and sub power switch. 5-14 bizhub PRO 920...
  • Page 127: Troubleshooting Tips

    Duplex modes cannot Is ADF open? Fully close ADF. be selected. Using user authentica- Is the message “Copy limit Contact your administrator. tion, copies cannot be reached” displayed? made after password is entered. bizhub PRO 920 5-15...
  • Page 128: Adf

    Multi-sheet bypass tray) and used. copy paper in the selected tray? Using Punch mode, cop- Is the message “Trash basket Empty the trash basket. ies cannot be punched. of Punch kit is full” dis- played? 5-16 bizhub PRO 920...
  • Page 129: Z Folding Unit

    Checkpoint Remedy Using Trimming mode, Is the message “Trash basket Empty the trash basket. copies cannot be of Trimmer is full” displayed? trimmed. Reminder If remedies mentioned above do not work, contact your service repre- sentative. bizhub PRO 920 5-17...
  • Page 131: Maintenance

    Maintenance...
  • Page 132: Cleaning Image Scanning Section

    Keep the ADF scanning glass clean; otherwise soil marks may be copied, re- sulting in dark lines on the copies. Raise the document feeder, then clean the glass with a clean soft cloth. Reminder Never use paint solvents, such as benzene or thinners, to clean the ADF scanning glass. bizhub PRO 920...
  • Page 133: Cleaning The Original Glass

    Raise the document feeder, then clean the ADF guide cover with a clean soft cloth. Reminder Never use paint solvents, such as benzene or thinners, to clean the orig- inal glass and ADF guide cover. bizhub PRO 920...
  • Page 134: Checking Copy Count

    - Developer count, cycle counter start date - Drum count, cycle counter start date Check the list, then print it, if desired. To check and print the counter list Press [Utility/Counter] on the control panel. The Utility Screen will be displayed. bizhub PRO 920...
  • Page 135 After the counter list is printed out, touch [Counter Output] to return to the previous screen. Detail The Developer count and Drum count can be selected to indicate either the cycle count or runtime count. Contact your service representative, if desired. bizhub PRO 920...
  • Page 136: Preventive Maintenance

    Setting>6 System Connection>1 Call Service Center). See page 4- 174 of POD Administrator’s reference. In this case, you don’t have to make a call for preventive maintenance, because your machine has been monitored automatically by your service representative. bizhub PRO 920...
  • Page 137: Specifications

    Specifications...
  • Page 138: Main Body Specifications

    Specifications Specifications Main Body Specifications Main Body Specifications Name bizhub PRO 920 Type Console type Copying system Laser electrostatic transfer method (dual beam) Original glass Stationary Photoconductor Light source Xenon lamp Developing method Dry-type dual-component reverse magnetic brush developing Fixing method...
  • Page 139: Adf

    Automatic feed Weight Approx. 22 kg Dimensions 650 (W) × 570 (D) × 170 (H) mm Power source Supplied from main body *: Detectable in landscape orientation (w) only These specifications are subject to change without notice. bizhub PRO 920...
  • Page 140: Option Specifications

    442 (W)* × 656 (D) × 990 (H) mm Weight Approx. 60 kg (FS-509) / 59 kg (FS-516) Power source Supplied from main body *: Effective size (width including Primary (main) tray) will be 688 mm / 825 mm (with the tray edge extended). bizhub PRO 920...
  • Page 141: Finisher Fs

    410 (W)* × 656 (D) × 990 (H) mm Weight Approx. 68 kg Power source Supplied from main body *: Effective size (width including Primary (main) tray) will be 675 mm / 791 mm (with the tray edge extended). bizhub PRO 920...
  • Page 142: Punch Kit Pk

    A4, A4R, B5, B5R, A5 Stack capacity 200 sheets max. or 30 mm thick or less Dimensions 511 mm (W) × 620 mm (D) × 220 mm (H) Weight Approx. 10.5 kg Power source Supplied from finisher bizhub PRO 920...
  • Page 143: Large Capacity Unit Lu-403

    Plain/Recycled paper: 16 to 24 lb Thick paper: 25 to 53 lb (200 g/m Thin paper: 13 to 15 lb Dimensions 670 (W) × 639 (D) × 695 (H) mm Weight Approx. 42 kg Power source Supplied from main body bizhub PRO 920...
  • Page 144 Paper sizes in Z-Fold mode 11"×17", 8.5"×14", A3, B4 Paper sizes other than listed above will be output without any fold. Dimensions 169 (W) × 660 (D) × 930 (H) mm Weight Approx. 38 kg Power source Supplied from an outlet bizhub PRO 920...
  • Page 145: Trimmer Unit Tu-501

    1,144 (W) × 604 (D) × 562 (H) mm Weight Approx. 68 kg Power source Supplied from an outlet Accessories: - Expanded Memory Unit EM-701 - Image Controller IC-203 - PostScript Kit PS-503 - Mount Kit MK-707 These specifications are subject to change without notice. bizhub PRO 920...
  • Page 147: Before Making Copies

    Before Making Copies...
  • Page 148: Features Of The Bizhub Pro 920

    Before Making Copies Before Making Copies Features of the bizhub PRO 920 Basic Functions • AES - Automatic Exposure Selection Automatically adjusts exposure to compensate for quality of the original. • Density Manually selects up to 9 density levels each for copy image and background.
  • Page 149: Original Image Type

    1-1 mode or separately onto each side of one sheet in 1-2 mode. You can use the Book Copy mode with the Front or Front/Back cover mode. The cover page(s) will be scanned and copied normally before image division is performed on the other pages. bizhub PRO 920...
  • Page 150 • Annotation Allows you to register words, current date/time, and annotation number as a set and to print it onto output copies at the location designated on the screen. bizhub PRO 920...
  • Page 151: Finishing

    Works in tandem to distribute a large copying job in half the time of non-tan- dem mode. Job List • Job List Displays the Job List Screen to view the output/send history, check the in- complete/suspended jobs, or to manage current and reserve jobs. bizhub PRO 920...
  • Page 152: Advanced Information

    Off/On daily or weekly, during lunch time, on holidays, and also enables the Timer Interrupt mode, which allows temporary use of the ma- chine even when the machine is in the daily, weekly, or holiday Off mode. bizhub PRO 920...
  • Page 153: How To Make A Basic Copy

    The following settings are available from the Basic Screen. Basic (See Section 9.) Combine Originals (See page 10-6.) Original Image Type (See page 10-23.) Application (See Section 11.) Finishing (See Section 12.) Paper Fold (See Section 12.) bizhub PRO 920...
  • Page 154 Entered quantity will be displayed on the touch panel. For detailed information on setting print quantity, see page 8-17. Position originals FACE UP in the document feeder, or FACE DOWN on the original glass. For detailed information on positioning originals, see page 8-10. bizhub PRO 920...
  • Page 155 When the copy job is completed, the normal Basic Screen will be re- stored. Detail The Job List Screen is provided to change the operation order of reserve jobs or cancel the reserve job. See page 13-2 for details. bizhub PRO 920...
  • Page 156: Positioning Originals

    Position original(s) FACE UP in the document feeder tray, according to the original set direction icon on the Basic Screen. – Place two-sided originals with page one FACE UP. Up to 100 orig- inals can be set at a time. 8-10 bizhub PRO 920...
  • Page 157 Do not set more than 100 originals or over the limit line indicated on the paper guides; otherwise a paper misfeed will occur. Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. bizhub PRO 920 8-11...
  • Page 158: To Position Originals In Mixed Original Mode

    Position mixed originals FACE UP, aligned with the left rear side of the document feedre tray. – Place two-sided originals with page one FACE UP. Up to 100 orig- inals can be set at a time. Adjust paper guides. 8-12 bizhub PRO 920...
  • Page 159 Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. Detail To use the Mixed Original mode, see procedure on page 10-12. For available combinations of mixed originals, see page 3-12. bizhub PRO 920 8-13...
  • Page 160: To Position Originals In Z-Folded Mode

    Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. Detail To use the Z-Folded mode, see procedure on page 10-14. For available original sizes in Z-Folded mode, see page 3-12. 8-14 bizhub PRO 920...
  • Page 161: Positioning Original On Original Glass

    Gently close the document feeder to prevent the original from shifting on the glass. Reminder When Book Copy, AUTO mode in Image Repeat, or Image Centering is selected, the document feeder should not be closed while scanning. bizhub PRO 920 8-15...
  • Page 162 Before Making Copies 7 CAUTION Do not place too heavy originals, or do not press strongly when thick original is placed and is under pressure of ADF. The glass may be broken and you may be injured. 8-16 bizhub PRO 920...
  • Page 163: Setting Print Quantity

    The copier is initially set to copy the original set in amounts determined by the print quantity setting, then outputs sorted sets. Enter the desired print quantity from the control panel keypad. Entered quantity will be displayed on the touch panel. bizhub PRO 920 8-17...
  • Page 164: To Change Print Quantity

    Follow the procedure below to change the print quantity that has been al- ready entered. Press [C] (clear quantity). The quantity displayed on the touch panel will return to 1. Enter the correct quantity. Entered quantity will be displayed on the touch panel. 8-18 bizhub PRO 920...
  • Page 165: Setting Job During Warmup

    FACE UP in the ADF or FACE DOWN on the original glass. Press [Start] to start scanning. – When scanning is completed, the message “Ready to reserve JOB” and [Job Reserve] key will be displayed on the screen. bizhub PRO 920 8-19...
  • Page 166 Detail To stop printing, press [Stop]. See the following subsection. The Job List Screen allows you to alter the output order of the reserve jobs or to delete the job. See page 13-3 for details. 8-20 bizhub PRO 920...
  • Page 167: To Stop Scanning/Printing

    If the direct selection screen is specified as the Basic Screen, touch Stop in the setting image area. The current machine operation of the selected job will be suspended, and the popup menu will be displayed on the Basic Screen. bizhub PRO 920 8-21...
  • Page 168 Before Making Copies Touch [Stop Job]. The data scanned for current job will be cleared to completely cancel the job. Do you want to complete the suspended job? % Touch [Continue]. 8-22 bizhub PRO 920...
  • Page 169: Basic Job Settings

    Basic Job Settings...
  • Page 170: Copy Conditions Incompatible With Basic Settings

    Bypass Setting Auto Paper Selects Auto Zoom Select X 1.0 Minimal Zoom Zoom Preset Zoom Individual Zoom User Zoom 1 > 1 1 > 2 Simplex/ Duplex 2 > 1 2 > 2 Separate Scan Mode Key bizhub PRO 920...
  • Page 171 Basic Job Settings Basic Combine Originals Quality -- -- -- bizhub PRO 920...
  • Page 172 Auto Zoom Select X X X X X X X 1.0 Minimal Zoom Zoom Preset Zoom Individual Zoom User Zoom 1 > 1 1 > 2 Simplex/ Duplex 2 > 1 2 > 2 Separate Scan Mode Key bizhub PRO 920...
  • Page 173 Grayed out (no response when touched) Automatically released Selectable but inefficient Operation cannot be started Prohibited to start the job operation with the message “Combination of this modes unavail- able” displayed. Compatible only when Print Insertion is selected. bizhub PRO 920...
  • Page 174: Selecting Exposure Level And Adjusting Background Whiteness

    This function can be set by the administrator to use in combination with each of four Original Type modes. (Utility Screen>2 Function Setting>3 Density Setting>1 Density Shift for Original Image Type) For details, see page 3-30 of POD Administrator’s reference. bizhub PRO 920...
  • Page 175: To Adjust Exposure Level And Background Whiteness

    Touch [Darker] to darken, or [Lighter] to lighten the copy image. – Highlight the desired exposure level indicator. – Touch [Std.] to select the middle density level. – When resuming AES, touch [Auto]. – To use preset density, touch [Pre 1] or [Pre 2]. bizhub PRO 920...
  • Page 176 The Basic Screen will be restored, with the specified exposure level in- dicated on the [Density] key. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. bizhub PRO 920...
  • Page 177: Paper Tray Setting

    The following describes how to use Auto Paper Select and Auto Zoom func- tions, and how to specify special paper size/type for using Multi-sheet by- pass tray. Detail Rotation can be deactivated manually. See page 11-64 for details. bizhub PRO 920...
  • Page 178: To Select Paper Size Automatically (Auto Paper Select)

    0 Auto Paper Select is incompatible with Auto Zoom, however, Rotation is available. 0 Auto Paper Select will not select the tray of the size specified as non- standard or wide size. Touch [Paper] on the Basic Screen. The Paper setting menu will be displayed. 9-10 bizhub PRO 920...
  • Page 179 Reminder Auto Paper Select may not function for the tray of the selected size due to the paper type/weight specified for that tray. Contact your administra- tor. bizhub PRO 920 9-11...
  • Page 180 1.001 - 1.103 8.5x11 (8.5x11R) 8.5x11R 1.104 - 1.294 1.104 - 1.294 (8.5x11) 1.295 11x17 1.295 11x17 11x17 1.296 - 1.545 11x17 8.5x14 1.296 - 1.545 1.546 - 4.000 1.546 - 4.000 11x17 ): Rotation functions 9-12 bizhub PRO 920...
  • Page 181: To Specify Desired Paper Size (Auto Zoom)

    Touch [OK] on the Paper setting menu. The Basic Screen will be restored. Do you want to start copying immediately? % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. bizhub PRO 920 9-13...
  • Page 182 (0.470) 0.500 0.607 0.500 0.647 0.647 1.000 0.470 5.5"x8.5"R/ 5.5"x8.5"WR (0.324) (0.393) (0.647) (0.500) (1.000) (0.647) (0.665) 0.486 0.591 0.973 0.752 1.376 0.973 1.000 A4/A4W (0.688) (0.835) (0.752) (0.973) (0.973) (1.376) (0.707) ( ): Rotation functions 9-14 bizhub PRO 920...
  • Page 183: Copying Using Special Paper (Bypass Tray Setting)

    When setting wide size, be sure to specify the precise dimensions of pa- per to be used. The dimensions of the wide size selected on the Wide Size Paper Screen are not correctly set in the initial setting. bizhub PRO 920 9-15...
  • Page 184: To Use Multi-Sheet Bypass Tray

    Open the Multi-sheet bypass tray, and load the copy paper. Touch [Paper] on the Basic Screen. The Paper setting menu will be displayed. Touch the bypass tray key. The [Bypass Setting] key will appear on the menu. 9-16 bizhub PRO 920...
  • Page 185 Basic Job Settings Touch [Bypass Setting]. Change Bypass Tray Setting Screen will be displayed. Specify the paper type. – Touch and highlight the desired paper type key from the seven types provided on the screen. bizhub PRO 920 9-17...
  • Page 186 Touch [Next] or [Back] to display the desired size key, then select the size to be detected as a standard size. Touch [OK] to complete the setting and return to the Change By- pass Setting Screen. 9-18 bizhub PRO 920...
  • Page 187 Touch [X] to highlight it, then use the control panel keypad to enter the desired horizontal size. Entered size should fall within the range from the horizontal size of the standard size corresponding to the selected wide size, to a maximum of 460 mm. bizhub PRO 920 9-19...
  • Page 188 Touch [Number of Tabs], then use the control panel keypad to enter the number of tabs. Setting range is from 1 to 15. If setting the custom tabbed paper size, touch [Input Size] to dis- play the Size Setting Screen. 9-20 bizhub PRO 920...
  • Page 189 % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. Select additional copy conditions, as required. “Auto” will be displayed on the Zoom key to show its activity. bizhub PRO 920 9-21...
  • Page 190 To copy the image on the tab part of the original onto the tabbed copy paper, Original Size Setting is also required. See page 10-21 for details. To copy onto OHP transparencies, Application setting is required. See page 11-21 for details. 9-22 bizhub PRO 920...
  • Page 191: Zoom

    Zoom setting menu, then touch [×1.0] to highlight it. Do you want to start copying immediately? % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. bizhub PRO 920 9-23...
  • Page 192: Changing Magnification Ratio

    The preset zoom ratio setting is described in POD Administrator’s refer- ence (3 Function Setting>4 Preset Zoom). See page 3-38. To set zoom mode Touch [Zoom] on the Basic Screen. The Zoom setting menu will be displayed. 9-24 bizhub PRO 920...
  • Page 193 “Zoom with Constant X and Y Ratio” area, then use the control panel keypad to enter the desired magnification ra- tio. The entered ratio will be displayed on the touch panel. Touch [OK] to return to the Zoom setting menu. bizhub PRO 920 9-25...
  • Page 194 The entered ratio will be displayed on the touch panel. Touch [OK] to return to the Zoom setting menu. – Preset Zoom: Touch the desired preset zoom key under the Set Zoom indication. 9-26 bizhub PRO 920...
  • Page 195 Did you enter a wrong number using keypad? % Continue by entering the correct number. Do you want to restore the previous setting? % Touch [Cancel]. bizhub PRO 920 9-27...
  • Page 196 % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. Detail To copy on paper loaded in any tray but the one of top priority using Auto Zoom function, see page 9-13. 9-28 bizhub PRO 920...
  • Page 197: Simplex/Duplex

    0 Position originals according to the original direction icon on the Basic Screen. 0 The normal double-sided copies (having the same edge as page top) can be made from double-sided originals printed upside down on the back pages. 2-2 Copying 1-2 Copying bizhub PRO 920 9-29...
  • Page 198 % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. Specify the original set direction and binding direction. – Touch [Combine Originals] to display the Combine Originals setting menu. 9-30 bizhub PRO 920...
  • Page 199 Touch [OK] to return to the Combine Originals setting menu. Select additional copy conditions, as desired. Position originals FACE UP in the document feeder. – Set originals according to the original direction icon displayed on the Basic Screen. Press [Start] to print. bizhub PRO 920 9-31...
  • Page 200: Making Double-Sided Copies Using Original Glass

    Touch [Combine Originals] to display the Combine Originals setting menu. – Touch [Original Direction] to display the Original Direction Screen, then touch the desired original direction key to highlight it. Touch [OK] to return to the Combine Originals setting menu. 9-32 bizhub PRO 920...
  • Page 201 The front side image of the double-sided copy will be scanned into memory. Do you want to stop scanning? % Press [Stop]. The scanned image will be cleared. Replace the original on the original glass with the back side image orig- inal, then press [Start]. bizhub PRO 920 9-33...
  • Page 202 Separate Scan mode will be released to disable the copier from scanning the original placed on the original glass. Detail For the information on unsuitable ADF originals, see page 3-10. 9-34 bizhub PRO 920...
  • Page 203: Making Single-Sided Copies From Double-Sided Originals

    Touch [OK] on the Simplex/Duplex setting menu. The Basic Screen will be restored. Do you want to start copying immediately? % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. bizhub PRO 920 9-35...
  • Page 204 Touch [Combine Originals] to display the Combine Originals setting menu. – Touch [Original Direction] to display the Original Direction Screen, then touch the desired original direction key to highlight it. Touch [OK] to return to the Combine Originals setting menu. 9-36 bizhub PRO 920...
  • Page 205 Touch [OK] to return to the Combine Originals setting menu. Select additional copy conditions, as desired. Position originals FACE UP in the document feeder. – Set originals according to the original direction icon displayed on the Basic Screen. Press [Start] to print. bizhub PRO 920 9-37...
  • Page 206: Separate Scan Mode

    If the number of originals exceeds 100, divide them into blocks not exceeding 100 sheets and load them from the block with the first page. When scanning job is started, the Basic Screen will slightly change to provide some other information. 9-38 bizhub PRO 920...
  • Page 207 To resume scanning, position original(s), then press [Start]. Memory indicator at the upper right corner of the touch panel allows you to check the remaining memory. Do you want to stop scanning? % Press [Stop]. All the scanned image will be cleared. bizhub PRO 920 9-39...
  • Page 208 When scanning is completed, touch [Complete Scan] to exit the Sepa- rate Scan mode. Press [Start]. All the data in memory will be output. Detail Press [Stop] to suspend the printing job. For details, see page 8-21. 9-40 bizhub PRO 920...
  • Page 209: Reserve Job Setting

    Press [Start] to scan/print the current job. The Basic Screen displays the message “Touch [Job Reserve] to set reserve Job.” Touch [Job Reserve]. The normal Basic Screen will be restored. bizhub PRO 920 9-41...
  • Page 210 Repeat steps 1 and 2. Up to 100 reserve jobs can be entered. Printing of the reserve job will automatically start. Detail To check and operate the reserve jobs, touch [Job List] to display the Job List Screen. See page 13-3 for details. 9-42 bizhub PRO 920...
  • Page 211: Original Setting

    Original Setting...
  • Page 212: Copy Conditions Incompatible With Original Settings

    8 in 1 Horizontal Numbering Direction Vertical Normal Left Upside Down Right & Left Bind Top Bind Normal Original Mixed Origina Z-Fold Single Feed Custom Size Custom Size (w/Full Area) Tab Paper Text/Photo Dot Matrix Photo Text 10-2 bizhub PRO 920...
  • Page 213 Original Setting Basic Combine Originals Quality *1 *1 bizhub PRO 920 10-3...
  • Page 214 Normal Original Mixed Original X X X X X X X X Z-Fold X X X X X Single Feed Custom Size Custom Size (w/Full Area) Tab Paper X X X Text/Photo Dot Matrix Photo Text 10-4 bizhub PRO 920...
  • Page 215 Application function previously selected will be released with the key grayed out. PI setting menu will appear when any cover mode key is selected. Selecting main body tray will be unavailable. All main body tray keys will be grayed out on the setting screen for insertion sheets. bizhub PRO 920 10-5...
  • Page 216: Combine Originals

    Selecting 4 in 1 or 8 in 1, the menu will additionally display two num- bering direction keys. Touch either [Horizontal] or [Vertical] to specify numbering order of original layout. Auto Zoom is automatically selected to make a copy using paper size loaded in the tray of top priority. 10-6 bizhub PRO 920...
  • Page 217 Do you want to select additional copy conditions? % Touch [Basic] or any other tab key to continue job settings. Enter the desired print quantity, position originals FACE UP in the doc- ument feeder, then press [Start]. bizhub PRO 920 10-7...
  • Page 218: Original

    Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Original Direction]. The Original Direction Screen will be displayed. Touch the desired original direction key to highlight it. 10-8 bizhub PRO 920...
  • Page 219 Specified original direction will be displayed as an icon on the Basic Screen when restored. Detail See Setting Binding Direction for Duplex Copies (page 12-6) and Select- ing Binding Direction of Originals (page 10-10) for reference. bizhub PRO 920 10-9...
  • Page 220: Selecting Binding Direction Of Originals (Bind)

    0 If the machine restores the initial setting, this function will be reset to Right & Left Bind. Single-sided copies Double-sided originals Double-sided copies Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Bind]. The Binding Direction Screen will be displayed. 10-10 bizhub PRO 920...
  • Page 221 The machine is set to match the original binding direction and copy bind- ing direction automatically. For details, see page 3-55 of POD Adminis- trator’s reference. bizhub PRO 920 10-11...
  • Page 222: Copying Mixed Size Originals (Mixed Original)

    ADF original guides. See page 3-12 for details. Auto Paper Select mode Mixed size originals Auto Zoom mode Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Special Original]. The Special Original Screen will be displayed. 10-12 bizhub PRO 920...
  • Page 223 Enter the desired print quantity, position originals FACE UP in the doc- ument feeder, then press [Start]. – Arrange the mixed size originals aligning the left and rear sides. Detail See page 8-12 for details on positioning mixed originals. bizhub PRO 920 10-13...
  • Page 224: Copying Z-Folded Originals (Z-Folded)

    0 This mode requires more scanning time to detect the original size. Z-folded original Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Special Original]. The Special Original Screen will be displayed. 10-14 bizhub PRO 920...
  • Page 225 Enter the desired print quantity, position originals FACE UP in the doc- ument feeder, then press [Start]. – Normal originals can be set together with the Z-folded original. Detail See page 8-14 for details on positioning Z-folded originals. bizhub PRO 920 10-15...
  • Page 226: Feeding Single Original From Adf (Single Feed)

    Contact your administrator to check the current setting. Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Special Original]. The Special Original Screen will be displayed. Touch [Single Feed] to highlight it. 10-16 bizhub PRO 920...
  • Page 227 The original will be fed and scanned, then the printing job will start in succession when the machine becomes ready for output. Reminder Never set more than one thick original or paste up, otherwise machine trouble may be caused. bizhub PRO 920 10-17...
  • Page 228: Procedure In Auto Start Mode

    The Combine Originals setting menu will be restored. Do you want to restore the previous setting? % Touch [Cancel]. Do you want to select additional copy conditions? % Touch [Basic] or any other tab key to continue job settings. 10-18 bizhub PRO 920...
  • Page 229 Without setting the original, adjust the ADF paper guides according to the original size to be set. Position a sheet of original FACE UP in the document feeder. The set original will be automatically fed and scanned. bizhub PRO 920 10-19...
  • Page 230 Original Setting Touch [Complete Scan] to deselect it and exit the Separate Scan mode, then press [Start]. The printing job will start. Reminder Never set more than one original, otherwise machine trouble may be caused. 10-20 bizhub PRO 920...
  • Page 231: Copying Non-Standard Size Originals (Custom Size / Tab Paper)

    Touch [Combine Originals] on the Basic Screen. The Combine Originals setting menu will be displayed. Touch [Original Size]. The Original Size Screen will be displayed. Touch [Custom Size] or [Tab Paper]. The Custom Size Screen or Tab Paper Screen will be displayed. bizhub PRO 920 10-21...
  • Page 232 Do you want to restore the previous setting? % Touch [Cancel]. Do you want to select additional copy conditions? % Touch [Basic] or any other tab key to continue job settings. Enter the desired print quantity, position original(s), then press [Start]. 10-22 bizhub PRO 920...
  • Page 233: Original Image Type

    Original Type modes. (Utility Screen>2 Function Setting>3 Density Setting>1 Density Shift for Original Image Type) For details, see page 3-30 in POD Administrator’s reference. Original Photo Text/Photo Dot Matrix Original Text/Photo Original Text/Photo Text bizhub PRO 920 10-23...
  • Page 234: To Specify Original Type

    Touch the desired mode key to highlight it. Enter the desired print quantity, position original(s), then press [Start]. Do you want to select additional copy conditions? % Touch [Basic] or any other tab key to continue job settings. 10-24 bizhub PRO 920...
  • Page 235: Applications

    Applications...
  • Page 236: Copy Conditions Incompatible With Applications

    X X X X X X Reduce & Shift Image Centering Full Scan No Rotate Booklet Pagination Adhesive Binding Frame/Center Erase Non-Image area erase Built-in Stamp Set Numbering Page No. Date,Time Watermark Watermark Numbering Annotation Image Overlay 11-2 bizhub PRO 920...
  • Page 237 Applications Basic Combine Originals Quality X X X bizhub PRO 920 11-3...
  • Page 238 X X X X X Built-in Stamp Set Numbering Page No. Date,Time Watermark Watermark Numbering Annotation Image Overlay X X X X None: Compatible ×: Grayed out (No response when touched) Release the one previously selected 11-4 bizhub PRO 920...
  • Page 239 PI setting menu will appear when any cover mode is selected. Selecting main body tray will be unavailable. Available only when Booklet Pagination (Adhesive Binding) is selected. Grayed out when [Front/Back Cover + Spread] is selected. bizhub PRO 920 11-5...
  • Page 240: Application Screen

    Check Screen to change the setting you made. For details, see page 14-4. To set Application function Touch [Application] tab on the touch panel. The Application Screen will be displayed. 11-6 bizhub PRO 920...
  • Page 241 Do you want to start copying immediately? % You don’t have to touch [Basic] to restore the Basic Screen. Posi- tion original(s) directly, then press [Start]. Enter the desired print quantity, position original(s), then press [Start]. bizhub PRO 920 11-7...
  • Page 242: Inserting Sheets And Covers (Insert Sheet)

    Post inserter PI-501 option is installed. Front cover blank Front cover printed Back cover blank Back cover printed Printed sheet insertion Blank sheet insertion Combination samples: Front&Back covers blank, and Front&Back covers printed, and blank sheet insertion printed sheet insertion 11-8 bizhub PRO 920...
  • Page 243: To Set Insert Sheet Function

    Insert Sheet Screen. – When using post inserter, load cover/insertion sheets into the cover sheet feeder of post inserter. Touch [Application]. The Application Screen will be displayed. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert Screen will be displayed. bizhub PRO 920 11-9...
  • Page 244 To insert a front cover: Touch [Front Cover], then proceed to the next step. – To insert a back cover: Touch [Back Cover], then proceed to step 7. – To insert the insertion sheets: Touch [Insert Paper], then proceed to step 8. 11-10 bizhub PRO 920...
  • Page 245 Touch [OK] to complete the setting and return to the previous screen. On the Back Cover Setting Screen, select the desired mode (Print/ Blank), copy mode (Simplex/Duplex), and tray paper to be used. bizhub PRO 920 11-11...
  • Page 246 Enter the page number of insertion location, us- ing “, (comma)” between pages or “- (hyphen)” for consecutive pages. Up to 20 digits (including comma and hyphen) can be en- tered for one operation. 11-12 bizhub PRO 920...
  • Page 247 (Set 03) will take priority. When all settings are completed, touch [OK] repeatedly till the Applica- tion Screen is restored. Enter the desired print quantity, position originals in the document feeder, then press [Start]. bizhub PRO 920 11-13...
  • Page 248: Locating Title Pages On The Front Side (Chapters)

    0 Entering “0” or the same page number twice will be ignored on the screen. 0 Chapter insertions occur in sequence even if original page numbers are entered out of sequence. 0 The chapter page can be copied on the sheet from another tray source. (Print Insertion) 11-14 bizhub PRO 920...
  • Page 249 Applications Touch [Application]. The Application Screen will be displayed. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert Screen will be displayed. Touch [Chapters]. The Chapters Screen will be displayed. bizhub PRO 920 11-15...
  • Page 250 Do you want to cancel changes to the settings? % Touch [Cancel]. Do you want to cancel the Chapters function? % Touch [Off]. Enter the desired print quantity, position originals in the document feeder, then press [Start]. 11-16 bizhub PRO 920...
  • Page 251: Inserting Images Into Printed Sets (Insert Image)

    0 When a page number is larger than the total original count, a sheet is in- serted as the last page. 0 Insertions occur in sequence, even if page numbers are entered out of sequence. 0 Entering the same page number twice will insert two sheets at that loca- tion. bizhub PRO 920 11-17...
  • Page 252 Applications Touch [Application]. The Application Screen will be displayed. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert Screen will be displayed. Touch [Insert Image]. The Insert Image Screen will be displayed. 11-18 bizhub PRO 920...
  • Page 253 Scan the document feeder images. – Position originals FACE UP in the document feeder. If the number of originals exceeds 100, divide them into blocks not exceeding 100 sheets and load them from the block with the first page. bizhub PRO 920 11-19...
  • Page 254 Place and scan the originals according to pagination. Press [Start]. Repeat steps 10 and 11 for all originals. Touch [Complete Scan] to exit the Separate Scan mode. Press [Start]. The copier will start printing when ready for output. 11-20 bizhub PRO 920...
  • Page 255: Copying Onto Transparent Films (Ohp Interleave)

    0 Bypass tray setting is automatically set to OHP. Set transparent films into the Multi-sheet bypass tray. When interleaf sheet is needed, load copy paper in any other tray to match the size of transparent films. bizhub PRO 920 11-21...
  • Page 256 Applications Touch [Application]. The Application Screen will be displayed. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert Screen will be displayed. Touch [OHP Interleave]. The OHP Interleave Screen will be displayed. 11-22 bizhub PRO 920...
  • Page 257 Select the desired OHP Interleave mode, then touch [OK] repeatedly till the Application Screen is restored. Do you want to cancel changes to the settings? % Touch [Cancel]. Do you want to cancel the OHP Interleave function? % Touch [Off]. Position original(s), then press [Start]. bizhub PRO 920 11-23...
  • Page 258: Programming Different Settings For An Output Job (Program Job)

    0 Finishing mode and print quantity setting cannot be specified for each JOB. The last setting made will be applied to all JOBs. 0 Program Job settings cannot be stored in Mode Memory. Touch [Application]. The Application Screen will be displayed. 11-24 bizhub PRO 920...
  • Page 259 Position originals FACE UP in the document feeder or FACE DOWN on the original glass. – If the number of document feeder originals exceeds 100, divide them into blocks not exceeding 100 sheets and load them from the block with the first page. bizhub PRO 920 11-25...
  • Page 260 Place and scan each original set in the correct order of pagination. Touch [Separate Scan] to deselect it and exit the Separate Scan mode. Select the desired Finishing mode and enter the print quantity from the control panel keypad. Press [Start]. 11-26 bizhub PRO 920...
  • Page 261: Dividing A Page Spread Into Right And Left Pages (Book Copy)

    Image division starts from the third scan, after the first and second Spread scan copy normally. 1-1 / 2-1 mode 1-2 / 2-2 mode Note Touch [Booklet] on the Book Copy Screen to use Booklet Pagination function together with Book Copy. bizhub PRO 920 11-27...
  • Page 262: To Set Book Copy Function

    0 When using original glass, Non-Image Area Erase and Image Centering are automatically selected. Do not close the document feeder when scanning the original on the original glass. Touch [Application]. The Application Screen will be displayed. Touch [Book Copy/Poster/Repeat]. 11-28 bizhub PRO 920...
  • Page 263 Touch [OK] repeatedly till the Application Screen is restored. Touch [Basic] to restore the Basic Screen. Auto Paper Select and Auto Zoom are automatically released, and the [Separate Scan] key appears highlighted to show that the Separate Scan mode is automatically selected. bizhub PRO 920 11-29...
  • Page 264 Press [Start] to scan. Repeat steps 10 to 11 for all originals. Touch [Separate Scan] to deselect it and exit the Separate Scan mode. Press [Start]. The copier will start printing when ready for output. 11-30 bizhub PRO 920...
  • Page 265 See the illustrations below for details. Front Cover + Spread Scan from first page Front/Back Cover + Spread Scan from first page Front Cover + Spread Scan body text Front/Back Cover + Spread Scan body text bizhub PRO 920 11-31...
  • Page 266: Repeating Selected Image Area (Image Repeat: Size Manual Input)

    Change the magnification manually, if desired. 0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa- rate Scan mode will function automatically. Touch [Application]. The Application Screen will be displayed. 11-32 bizhub PRO 920...
  • Page 267 Touch [Size Manual Input], then specify the vertical and horizontal widths of the scanning area. – Touch [Hori] or [Vert] to highlight it, then use the screen keypad to enter the width from 10 to 150 mm in 1 mm increments. bizhub PRO 920 11-33...
  • Page 268 Enter the desired print quantity from the control panel keypad. Position original FACE DOWN on the original glass, as shown in the il- lustration at the top of this section. Press [Start]. 11-34 bizhub PRO 920...
  • Page 269: Repeating Automatically Or Select Repeating Times (Image Repeat: Size Auto Detect / Repeat)

    Use 2 Repeat in designated order mode to have the same cut side when cutting copied sheets in two. Size Auto Detect mode Repeat mode 2 Repeat 4 Repeat 8 Repeat bizhub PRO 920 11-35...
  • Page 270: To Set Size Auto Detect And Repeat Modes Of Image Repeat

    0 When Size Auto Detect mode is selected, Non-Image Area Erase func- tions automatically. Do not close the document feeder when scanning the original on the original glass. Touch [Application]. The Application Screen will be displayed. Touch [Book Copy/Poster/Repeat]. 11-36 bizhub PRO 920...
  • Page 271 Touch the desired mode key. – To select Size Auto Detect mode, touch [Size Auto Detect], then proceed to step 6. – To select 2 Repeat, 4 Repeat, or 8 Repeat, touch [Repeat] to display the Repeat Mode Screen. bizhub PRO 920 11-37...
  • Page 272 Detail The Size Auto Detect mode may not operate properly if the lighting in the work place is directly over the original glass. In this case, consult your service representative about an appropriate place for installation. 11-38 bizhub PRO 920...
  • Page 273: Making Multiple Page Signature Booklet (Booklet Pagination)

    Magazine binding Adhesive binding Double-sided docoment Detail The Utility Screen provides the setting to position the page numbers au- tomatically on the outside edges of the copy when using Booklet Pagina- tion with Page Numbering in Stamp. bizhub PRO 920 11-39...
  • Page 274: To Set Booklet Pagination Function

    When selecting cover sheet mode (Cover With Copy Sheet or Cover With Blank Sheet), load the same size cover paper in any other tray unless it is specified as Thick or Tab Paper. Touch [Application]. The Application Screen will be displayed. Touch [Booklet Pagination]. 11-40 bizhub PRO 920...
  • Page 275 Auto Zoom is automatically selected. To release Auto Zoom, select the desired magnification, then select paper size. Select 1-2 or 2-2 copy mode. Enter the desired print quantity from the control panel keypad. Position originals FACE UP in the document feeder, then press [Start]. bizhub PRO 920 11-41...
  • Page 276 In such a case, use the page interval function and creep function in Shift mode of Page Margin. See page 11-45 for details. 11-42 bizhub PRO 920...
  • Page 277: Reversing Color In Black And White Image (Neg-/Positive Reverse)

    This is very good for copying white- on-black originals and reversing them to fax. Original Neg-/Positive Reverse copying To set Neg-/Positive Reverse function Touch [Application]. The Application Screen will be displayed. bizhub PRO 920 11-43...
  • Page 278 Applications Touch [Neg-/Positive Reverse] to highlight it. Do you want to cancel the “Neg-/Positive Reverse” function? % Touch [Neg-/Positive Reverse] again. Enter the desired print quantity from the control panel keypad. Position original(s), then press [Start]. 11-44 bizhub PRO 920...
  • Page 279: Adjusting Position Of Copy Image (Page Margin: Shift Mode)

    0 Shift amount: 0 to 250 mm in 1 mm increments 0 Creep amount: 0 to 50 mm in 1 mm increments 0 Setting in 0.1 mm increments using up/down arrow key is also available. This setting change can be made on the Utility Screen. bizhub PRO 920 11-45...
  • Page 280 Applications Touch [Application]. The Application Screen will be displayed. Touch [Page Margin]. The Page Margin Screen will be displayed. Touch [Shift]. 11-46 bizhub PRO 920...
  • Page 281 0 to 50 mm in 1 mm increments. Touch [OK]. The Application Screen will be restored. Do you want to cancel changes to the settings? % Touch [Cancel]. Do you want to cancel the Page Margin function? % Touch [Off]. bizhub PRO 920 11-47...
  • Page 282 Use this function to make the desired amount of blank space between the two images on a page. See the illustration below for details. Page interval Booklet Pagination 2 Repeat in Page interval Image Repeat Page interval 11-48 bizhub PRO 920...
  • Page 283 Enter the creep amount of the images on the outermost page, while en- tering the page interval amount of the images on the innermost page. Center Center Page interval Creep Creep bizhub PRO 920 11-49...
  • Page 284: Reducing Images To Create Binding Margin (Page Margin: Reduce & Shift Mode)

    Use Reduce & Shift mode instead of Shift mode to prevent image loss when creating a binding margin. Left binding margin Right Left Down Originals Front Right binding margin Right Left Down Top binding margin Back Left Right Right Left Down 11-50 bizhub PRO 920...
  • Page 285: To Set Reduce & Shift Mode Of Page Margin

    0 Setting in 0.1 mm increments using up/down arrow key is also available. This setting change can be made on the Utility Screen. Touch [Application]. The Application Screen will be displayed. Touch [Page Margin]. The Page Margin Screen will be displayed. bizhub PRO 920 11-51...
  • Page 286 Do you want to start copying immediately? % You don’t have to touch [OK] to restore the Basic Screen. Position original(s) directly, then press [Start]. Select the additional copy conditions, as desired. Enter the desired print quantity, position original(s), then press [Start]. 11-52 bizhub PRO 920...
  • Page 287: Eliminating Black Copy Marks Along Borders (Frame/Center Erase)

    When lowering the document feeder onto thick original (e.g. open book), do not press it down too hard. Keep the document feeder open, if re- quired. To set Frame/Center Erase function Touch [Application]. The Application Screen will be displayed. bizhub PRO 920 11-53...
  • Page 288 The Frame/Center Erase Screen will be displayed. Touch the desired mode key. – Touch [Frame Erase/All Sides], [Frame Erase/Each Side], or [Center Erase] to highlight it. Either of Frame Erase mode and Center Erase mode can be selected in combination. 11-54 bizhub PRO 920...
  • Page 289 Touch [OK] repeatedly till the Application Screen is restored. Do you want to cancel changes to the settings? % Touch [Cancel]. Do you want to cancel the Frame/Center Erase function? % Touch [Off]. Enter the desired print quantity, position original(s), then press [Start]. bizhub PRO 920 11-55...
  • Page 290: Erasing Outside Of Original (Non-Image Area Erase)

    0 Original size should be larger than 10 mm × 10 mm. 0 Auto Zoom and Auto Paper Select are automatically released. 0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa- rate Scan mode will function automatically. 11-56 bizhub PRO 920...
  • Page 291 The Application Screen will be displayed. Touch [Erase]. The Erase Screen will be displayed. Touch [Non-Image Area Erase] to highlight it. Do you want to cancel the “Non-Image Area Erase” function? % Touch [Non-Image Area Erase] again. bizhub PRO 920 11-57...
  • Page 292 (AUTO mode). If desired, display the Utility Screen to specify either mode and the origi- nal density level manually so that the Non-Image Area Erase functions without fail. Oblique erase mode Rectangle erase mode 11-58 bizhub PRO 920...
  • Page 293: Copying Image In The Center Of Copy Paper (Image Centering)

    0 Auto Zoom and Auto Paper Select are automatically released, and 1.000 (100 %) is selected as a magnification ratio. 0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa- rate Scan mode will function automatically. bizhub PRO 920 11-59...
  • Page 294 The Application Screen will be displayed. Touch [Image Adjustment]. The Image Adjustment Screen will be displayed. Touch [Image Centering] to highlight it. Do you want to cancel the “Image Centering” function? % Touch [Image Centering] again. 11-60 bizhub PRO 920...
  • Page 295 Applications Touch [OK] to restore the Application Screen. Select magnification and paper size, as desired. Enter the desired print quantity, position original, then press [Start]. bizhub PRO 920 11-61...
  • Page 296: Printing Images Fully To The Edges (Full Scan)

    Use this function to make copies printed completely to the edges. Normal copy Full Scan Original To set Full Scan function Touch [Application]. The Application Screen will be displayed. Touch [Image Adjustment]. The Image Adjustment Screen will be displayed. 11-62 bizhub PRO 920...
  • Page 297 Touch [Full Scan] to highlight it. Do you want to cancel the “Full Scan” function? % Touch [Full Scan] again. Touch [OK] to restore the Application Screen. Enter the desired print quantity, position original(s), then press [Start]. bizhub PRO 920 11-63...
  • Page 298: Copying Without Image Rotation (No Rotate)

    0 If [Reset] on the control panel is pressed or Auto Reset functions, Rota- tion function will be activated automatically. Touch [Application]. The Application Screen will be displayed. Touch [Image Adjustment]. The Image Adjustment Screen will be displayed. 11-64 bizhub PRO 920...
  • Page 299 The administrator can set this function to activate always, only when Auto Zoom or Auto Paper Select is activated, or only when Auto Zoom, Auto Paper Select or reduce is activated. See page 4-165 of the POD Admin- istrator’s reference. bizhub PRO 920 11-65...
  • Page 300: Printing Stamp, Distribution Number, Page Number, Date/Time Onto Copies (Stamp)

    002 / 005 Set Numbering Right Center Mid Left 2 / 5 Page No. ’05/05/10 10:30AM Low Left Low Rig. Low Mid Date/Time Printing positions To set Stamp function Touch [Application]. The Application Screen will be displayed. 11-66 bizhub PRO 920...
  • Page 301 Touch to select the desired key in the Stamp area. The subsequent screen will be displayed to allow you to specify the se- lected stamp type. When selecting [Built-in Stamp]: Specify the stamp type, printing posi- tion, character size and print page. bizhub PRO 920 11-67...
  • Page 302 Touch [Print Page] to designate whether to print the selected stamp on the cover only or on all pages. When selecting [Set Numbering]: Specify the numbering type, printing position, character size, print page and start number. 11-68 bizhub PRO 920...
  • Page 303 – Touch [Start Number] to designate the starting number, if required. Use the touch panel keypad or up/down arrow key to enter the de- sired starting number, then touch [OK] to return to the previous screen. bizhub PRO 920 11-69...
  • Page 304 Touch [Change Character] to select the desired character size (8, 10, 12, 14 point) and type (Gothic or Ming) on the subsequent screen. Touch [OK] to complete the setting and return to the previ- ous screen. 11-70 bizhub PRO 920...
  • Page 305 Also touch [Start Page] or [Start Chapter] to highlight it, and enter the desired start page number or chapter number. Touch [OK] to complete the setting and return to the previous screen. bizhub PRO 920 11-71...
  • Page 306 Touch [Change Character] to select the desired character size (8, 10, 12, 14 point) and type (Gothic or Ming) on the subsequent screen. Touch [OK] to complete the setting and return to the previ- ous screen. 11-72 bizhub PRO 920...
  • Page 307 Touch [OK] repeatedly till the Application Screen is restored. Do you want to cancel changes to the settings? % Touch [Cancel]. To cancel the Stamp function % Touch [Off]. Enter the desired print quantity, position original(s), then press [Start]. bizhub PRO 920 11-73...
  • Page 308 Touch [Top], [Left], [Right], or [Bottom] to specify the direction, then use the touch panel keypad or up/down arrow key to enter the desired amount, from 0 to 50 mm. Touch [OK] to return to the previous screen. 11-74 bizhub PRO 920...
  • Page 309: Printing Watermark Onto Copies (Watermark)

    Use this function to print the desired letter type obliquely in the center of the page (Watermark), or the numbers in the specified form repeatedly over the scanned image (Set Numbering). Watermark Set Numbering To set Watermark function Touch [Application]. The Application Screen will be displayed. bizhub PRO 920 11-75...
  • Page 310 The Stamp/Image Overlay Screen will be displayed. Touch to select the desired key in the Watermark area. The subsequent screen will be displayed to allow you to specify the se- lected watermark type. When selecting [Watermark]: Specify the watermark type and density. 11-76 bizhub PRO 920...
  • Page 311 Fine Adjustment Screen. Touch and highlight the desired direction key, then use the touch panel keypad or up/down arrow key to en- ter the desired amount, from 0 to 50 mm. Touch [OK] to return to the previous screen. bizhub PRO 920 11-77...
  • Page 312 When selecting [Set Numbering]: Specify the numbering type, density, character size, and start number. – Touch [Set Numbering Type], then select the desired numbering type on the subsequent screen. Touch [OK] to restore the previous screen. 11-78 bizhub PRO 920...
  • Page 313 Touch [OK] repeatedly till the Application Screen is restored. Do you want to cancel changes to the settings? % Touch [Cancel]. Do you want to cancel the Watermark function? % Touch [Off]. Enter the desired print quantity, position original(s), then press [Start]. bizhub PRO 920 11-79...
  • Page 314: Printing Words, Date/Time, Annotation Number Onto Copies (Annotation)

    However, the serial count will be suspended if this function is deselected or Temporary Number Setting is specified. 0 Printing position can be selected from 9 positions, and fine adjustment is available within ± 0 to 50 mm both in up/down and right/left directions. 11-80 bizhub PRO 920...
  • Page 315 Applications Touch [Application]. The Application Screen will be displayed. Touch [Stamp/Image Overlay]. The Stamp/Image Overlay Screen will be displayed. Touch [Annotation]. The Annotation Screen will be displayed. bizhub PRO 920 11-81...
  • Page 316 Up to 12 alphanumerical characters can be entered. With this setting specified, the entered number or word will be print- ed on all pages and the annotation number will not be counted in the former setting. 11-82 bizhub PRO 920...
  • Page 317 Words to type in before annotation number (up to 20 alphanumerical characters) Start number of the annotation number Printing form of the annotation number (2 types provided) Temporary number (up to 12 alphanumerical characters) Font type (Gothic/Ming) Character size (8/10/12/14 point) bizhub PRO 920 11-83...
  • Page 318: Overlay An Image Onto Each Page Copied In The Job (Image Overlay)

    Specifications for Image Overlay 0 Separate Scan mode is automatically selected. 0 Auto Zoom and Auto Paper Select are automatically released, and 1.000 (100 %) is selected as a magnification ratio. Touch [Application]. The Application Screen will be displayed. 11-84 bizhub PRO 920...
  • Page 319 Enter the desired print quantity from the control panel keypad. Position the overlaying original. – Position the original FACE up in the document feeder or FACE DOWN on the original glass. Press [Start] to scan. The original image will be scanned into memory. bizhub PRO 920 11-85...
  • Page 320 DOWN on the original glass. Press [Start] to scan. Repeat steps 10 and 11 for all originals. Touch [Complete Scan] to exit the Separate Scan mode. Press [Start]. The copier will start printing when ready for output. 11-86 bizhub PRO 920...
  • Page 321: Storing Image On Hdd / Overlaying Stored Image (Program Image Overlay)

    Specifications for Program Image Overlay 0 Use original glass to scan overlaying image. 0 Separate Scan mode is automatically selected. 0 Auto Zoom and Auto Paper Select are automatically released, and 1.000 (100 %) is selected as a magnification ratio. bizhub PRO 920 11-87...
  • Page 322 The Application Screen will be displayed. Touch [Stamp/Image Overlay]. The Stamp/Image Overlay Screen will be displayed. Touch [Program Image Overlay]. The Overlaying Image Selection Screen will be displayed. Do you want to recall image previously stored? % Proceed to step 9. 11-88 bizhub PRO 920...
  • Page 323 The Basic Screen to store the overlaying image will be displayed. Se- lect the desired copy conditions. What if the entered image name has been already used? % See Note at the bottom of this section. Position the overlaying original on the original glass. bizhub PRO 920 11-89...
  • Page 324 Position the original FACE up in the document feeder or FACE DOWN on the original glass. Press [Start] to scan. Enter the desired print quantity from the control panel keypad. Press [Start]. The copier will start printing when ready for output. 11-90 bizhub PRO 920...
  • Page 325 Image Selection Screen in order to delete the registered image. Select the image key to be deleted, then touch [Delete]. The popup menu with [Yes] and [No] keys will be displayed. Touch [Yes] to delete. bizhub PRO 920 11-91...
  • Page 327: Finishing / Paper Fold

    Finishing / Paper Fold...
  • Page 328: Copy Conditions Incompatible With Finishing / Paper Fold Modes

    Position Setting Right & Left Bind Bind Top Bind Face Up Order Face Direction Face Down 1 to N Order N to 1 Tandem Half Fold Fold & Staple Letter Fold In Letter Fold Out Z-Fold 12-2 bizhub PRO 920...
  • Page 329 Finishing / Paper Fold Basic Combine Originals Quality bizhub PRO 920 12-3...
  • Page 330 Position Setting Right & Left Bind Bind Top Bind Face Up Order Face Direction Face Down 1 to N Order N to 1 Tandem Half Fold Fold & Staple Letter Fold In Letter Fold Out Z-Fold 12-4 bizhub PRO 920...
  • Page 331 Finishing / Paper Fold Application Finishing Paper Fold None: Compatible ×: Grayed out (no response when touched) Selectable but inefficient bizhub PRO 920 12-5...
  • Page 332: Setting Binding Direction For Duplex Copies

    0 Top bind for duplex printing functions properly only when duplex mode is selected. 0 If the machine is reset, the binding mode will go back to R&L bind. Touch [Finishing] on the Basic Screen. The Finishing setting menu will be displayed. 12-6 bizhub PRO 920...
  • Page 333 Finishing / Paper Fold Touch [Order Direction]. The popup menu for setting output styles will appear. Touch [Top] to highlight it. Touch [OK]. Touch [OK] on the Finishing setting menu. bizhub PRO 920 12-7...
  • Page 334 Touch [OK]. The Basic Screen will be restored. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. 12-8 bizhub PRO 920...
  • Page 335: Setting Output Face And Order

    - N to 1: Outputs copies in reverse order of original pagination. To set output face and order Touch [Finishing] on the Basic Screen. The Finishing setting menu will be displayed. Touch [Order Direction]. The popup menu for setting output styles will appear. bizhub PRO 920 12-9...
  • Page 336 Touch [OK] on the Finishing setting menu. The Basic Screen will be restored. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. 12-10 bizhub PRO 920...
  • Page 337: Sorting / Stapling Copies

    Finisher FS-604, then install it to the primary (main) tray. (2) When copying job is completed, remove the paper guide from the pri- mary (main) tray, and return it to its original position. bizhub PRO 920 12-11...
  • Page 338 (1 to N) or back to front (N to 1). Example: Make 3 copied sets Sort & Group & Sort & Group & Face Down Face Down Face Up Face Up Note Binding direction, output face, and output order settings are available. 12-12 bizhub PRO 920...
  • Page 339: To Set Finishing Mode

    To set Sort mode, touch [Sort] to highlight it. – To set Group mode, touch [Group] to highlight it. – To use Offset mode in combination with Sort or Group mode, touch [Offset] to highlight it. bizhub PRO 920 12-13...
  • Page 340 Touch [Corner] or [2 Position] to highlight it. The staple position cur- rently selected will be displayed on the left side of the screen. – To change the staple position, touch [Pos. Set] to select the desired staple position. 12-14 bizhub PRO 920...
  • Page 341 The primary (main) tray gradually goes down while printed materials out- put. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. bizhub PRO 920 12-15...
  • Page 342: Making Folded Booklet (Half Fold / Fold&Staple / Trimming)

    0 Trimmer unit tray capacity: Approx. 512 sheets at maximum 100 sets max. of 2 to 5-sheet-folded booklet (500 sheets max.) 50 sets max. of 6 to 10-sheet-folded booklet (500 sheets max.) 32 sets max. of 11 to 16-sheet-folded booklet (512 sheets max.) 12-16 bizhub PRO 920...
  • Page 343 Touch [Half Fold] or [Fold&Staple], as desired. – If the finisher is mounted with Trimmer unit TU-501, the Trimming popup menu will appear. Touch [Trimming] to highlight it if this function is desired, then touch [OK]. bizhub PRO 920 12-17...
  • Page 344 Touch [OK] on the Paper Fold setting menu. The Basic Screen will be restored. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. 12-18 bizhub PRO 920...
  • Page 345: Folding Copies In Three (Letter Fold In / Letter Fold Out)

    0 Selecting Letter Fold In automatically sets the output face to Face Up, while Letter Fold Out sets to Face Down. Touch [Paper Fold] on the Basic Screen. The Paper Fold setting menu will be displayed. Touch [Letter Fold In] or [Letter Fold Out], as desired. bizhub PRO 920 12-19...
  • Page 346 Touch [OK] on the Paper Fold setting menu. The Basic Screen will be restored. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. 12-20 bizhub PRO 920...
  • Page 347: Output Z-Folded Copies (Z-Fold)

    0 Copy paper cannot be fed from trays specified as Thick 2, OHP, or Trac- ing in paper type, or specified as any size other than Standard. (Unavail- able for the sizes in Original Size Detection, Custom, Wide Size or Tab Paper) bizhub PRO 920 12-21...
  • Page 348 Touch [OK] on the Paper Fold setting menu. The Basic Screen will be restored. Note If no other settings are required, you don’t have to touch [OK] to restore the Basic Screen. Position originals, then press [Start] to start the printing job. 12-22 bizhub PRO 920...
  • Page 349: Punching File Holes In Copies (Punch)

    0 If the ATS (Automatic Tray Switching) functions while the machine uses the Punch mode, the punch holes may be slightly off the appropriate po- sitions. 0 Special size paper (sizes in Original Size Detection, Custom, Wide Size or Tab Paper) cannot be punched. bizhub PRO 920 12-23...
  • Page 350 The punch position currently selected will be displayed on the left side of the screen. Change the punch position, if desired. – To change the punch position, touch [Pos. Set] to display the pop- up menu, then select the desired punch position. 12-24 bizhub PRO 920...
  • Page 351 The primary (main) tray gradually goes down while printed materials out- put. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. bizhub PRO 920 12-25...
  • Page 352: Cover Sheet Feeding (Post Inserter)

    0 Upper/Lower tray capacity: 200 sheets (110 lb paper) or within 30 mm thick each 0 Use ADF. 0 The cover paper size should be the same as copy paper size. 0 Cover paper loaded in the post inserter cannot be copied. 12-26 bizhub PRO 920...
  • Page 353 Finishing / Paper Fold Load cover paper into the upper and lower trays of the post inserter. Upper tray Lower tray Use Insert Sheet or Booklet Pagination function to attach covers to the output copies. bizhub PRO 920 12-27...
  • Page 354: 12.10 Using Finisher Manually

    – Punch Reminder The Z folding unit ZU-602 cannot be used for manual punch. To use Punch mode manually, Punch kit PK-505 is necessary. Start/Stop button Fold&Staple 1 oblique staple 2 parallel staples Letter Fold Punch 12-28 bizhub PRO 920...
  • Page 355: To Use Finisher Manually

    – Punch: Place paper face UP. – Fold&Staple: Place the front of the finished set UP. – Letter Fold: Place the outside of the fold UP. Lower tray – Align the guide plate with the paper. bizhub PRO 920 12-29...
  • Page 356 To select only the Punch mode, turn off all the other mode lamps. Press Start/Stop button. Do you want to stop the output operation? % Press Start/Stop button on the operation panel of post inserter. 12-30 bizhub PRO 920...
  • Page 357: 12.11 Using Two Copiers In Tandem

    In this case, copying will be available by entering the user/account pass- word in the master machine only. The password will be transmitted to the tandem machine automatically so as to enable the copying operation. See POD Administrator’s reference for details of setting User Authentica- tion function. bizhub PRO 920 12-31...
  • Page 358: To Use Two Copiers In Tandem

    Touch [Tandem] on the Basic Screen of either copier. – If the direct selection screen is specified as the Basic Screen, the Tandem key will be displayed in the setting image area. The Tandem Function Setting Screen will be displayed. 12-32 bizhub PRO 920...
  • Page 359 Ordinary copying operation is still available on the tandem machine during the tandem mode setting. – Corresponding tray sizes on the master and tandem machines should be the same when using multiple trays for a single job. bizhub PRO 920 12-33...
  • Page 360 When a print quantity amount of 100 is entered, the master and tan- dem machines will each copy and output 50 sets. Position original(s) FACE UP in the document feeder or FACE DOWN on the original glass of the master machine. 12-34 bizhub PRO 920...
  • Page 361 Interrupt mode during Tandem mode copying: Interrupt copying is available only on the copier with [Interrupt] pressed. The tandem mode copying on the copier in interrupt mode will be sus- pended until the interrupt copying is completed. bizhub PRO 920 12-35...
  • Page 362 Take the appropriate troubleshooting measures to be ready for copying. Tandem printing job cannot be started if 100 reserve jobs (not in tan- dem mode) are entered on the tandem machine. Wait until the reserve jobs are completed on the tandem machine. 12-36 bizhub PRO 920...
  • Page 363: To Stop Scanning/Printing

    Touch [Continue] to go on, or [Stop Job] to delete all the data transmit- ted from the master machine and to release the tandem mode. The master machine will take over the remaining print quantity and complete the job. bizhub PRO 920 12-37...
  • Page 364 Once the Distribution recovery mode is activated and the master ma- chine is already handling the remaining print quantity, the tandem ma- chine cannot continue with the tandem printing job, even when [Continue] is touched. 12-38 bizhub PRO 920...
  • Page 365: Troubleshooting

    Distribution recovery mode functions to complete the job on the master machine. When the power is turned off on either the master or tandem machine: The tandem mode will be released automatically in either case. Restart the procedure from the first step. bizhub PRO 920 12-39...
  • Page 367: Job Management

    Job Management...
  • Page 368: Overview Of Job List Screen

    Touch [Job List] on the Basic Screen. The Job List Screen will be displayed. Touch the desired key on the screen. See the following pages for details of each subsequent screen. Touch [Close] to exit the Job List Screen. 13-2 bizhub PRO 920...
  • Page 369: Job Operation On Job List Screen

    Job operation for reserved jobs Touch [Reserve] on the Job List Screen. – Check the status of the reserved jobs. – Touch the lower arrow key to scroll, if 6 or more jobs are entered. bizhub PRO 920 13-3...
  • Page 370 To check the settings of reserve job: Touch to highlight the desired reserve job key, then touch [Details]. Check the settings of the selected job on the screen. Touch [Close] to return to the Job List Screen. 13-4 bizhub PRO 920...
  • Page 371: Displaying Output History

    Touch the lower arrow key to scroll, if 6 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. Touch [Close] to return to the previous screen. bizhub PRO 920 13-5...
  • Page 372: Displaying Send History

    Touch the lower arrow key to scroll, if 6 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. Touch [Close] to return to the previous screen. 13-6 bizhub PRO 920...
  • Page 373: Checking Incomplete Jobs

    Touch the lower arrow key to scroll, if 6 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. Touch [Close] to return to the previous screen. bizhub PRO 920 13-7...
  • Page 374: To Check/Operate Suspended Jobs

    “Suspended” will be displayed in the Status area of the suspended job key to prompt you that a suspended job remains in the machine. – Check the status of the suspended jobs. – Touch the lower arrow key to scroll, if 6 or more jobs are entered. 13-8 bizhub PRO 920...
  • Page 375 To check the settings of suspended job: Touch to highlight the desired reserve job key, then touch [Details]. Check the settings of the selected job on the screen. Touch [Close] to return to the Job List Screen. bizhub PRO 920 13-9...
  • Page 376: To Check/Control Spool Jobs

    If printing order cannot be changed for the selected job, a message will be displayed for information. 13-10 bizhub PRO 920...
  • Page 377: Advanced Information

    Advanced Information...
  • Page 378: Checking Feature Selections By Proof Copying

    A sample copy will be output while scanning originals in the ADF. If Separate Scan mode has been used, a sample set will be delivered immediately. The screen for checking the job settings will be displayed. 14-2 bizhub PRO 920...
  • Page 379 Advanced Information Check the settings made for the current job. Do you want to change the settings? % See page 14-4 for details. Press [Start]. The machine will start printing. bizhub PRO 920 14-3...
  • Page 380: Checking Feature Selections Before Copying (Check Mode)

    Program Job, Non-Image Area Erase, Neg. Pos. Reverse, Image Center- ing, Full Scan, Overlay. Select the desired copy conditions from the various setting screens. Press [Mode Check] on the control panel. The Check Screen will be displayed. 14-4 bizhub PRO 920...
  • Page 381 – To release any application function from the Check Screen, pro- ceed to step 5. – If a sample copy is needed, proceed to step 6. – If settings are OK, proceed to step 8. bizhub PRO 920 14-5...
  • Page 382 Check Screen. – Touch [Yes] to cancel the function, or [No] to restore. – If making a set or sample copy, proceed to the next step. – To start printing without proofcopying, proceed to step 8. 14-6 bizhub PRO 920...
  • Page 383 If proof copying has been made, the machine will simply start printing without scanning originals. Note If the desired selection cannot be changed, press [Stop] to delete all the data in memory, then press [Reset] to restart the job setting. bizhub PRO 920 14-7...
  • Page 384: Interrupt Copying

    0 Low Power or Sleep will not function during Interrupt mode. Press [Interrupt] on the control panel. The Interrupt LED starts flashing, then keeps lighted when machine is ready for Interrupt mode. The Basic Screen for Interrupt copying will be displayed. 14-8 bizhub PRO 920...
  • Page 385 Press [Start] to resume copying. Note To check settings for the previous job before restarting, touch [Close] on the Machine Status Screen to display the Basic Screen. Check the settings, then press [Start] to resume copying. bizhub PRO 920 14-9...
  • Page 386: Storing And Recalling Job Conditions (Mode Memory)

    0 Locked job cannot be given any change till released by the administrator. Make the desired job selections from various setting menu. Press [Mode Memory] on the control panel. The Mode Memory Screen will be displayed. 14-10 bizhub PRO 920...
  • Page 387 Touch [Store]. The Check Screen will be displayed. Review the settings to be stored. – Touch the right and left arrow keys to scroll. Touch [OK] on the Check Screen. The Job Store Screen will be displayed. bizhub PRO 920 14-11...
  • Page 388 Enter a job name in up to 16 characters, using the touch panel key- pad. – Use right and left arrow keys to move the cursor, and use [Shift] to enter upper case letters or symbols. 14-12 bizhub PRO 920...
  • Page 389: Recalling Stored Job Settings

    Display the Basic Screen, then press [Mode Memory] on the control panel. The Mode Memory Screen will be displayed. Touch a job key to select a job you want to recall. – The job keys numbered from 01 to 10 are displayed on the screen. bizhub PRO 920 14-13...
  • Page 390 Do you want to select another job? % Touch [Cancel]. Touch [OK] on the Check Screen. The settings of the selected job will be recalled on the restored Basic Screen. Position original(s), then press [Start] to print. 14-14 bizhub PRO 920...
  • Page 391: Recalling Previous Job Settings

    Press [Mode Memory] on the control panel. The Mode Memory Screen will be displayed. Touch [Pre-Job Recall]. The [Job Check] key will appear on the screen. Touch [Job Check] to review the settings. The Check Screen will be displayed. bizhub PRO 920 14-15...
  • Page 392 Check the settings of the previous job on the screen. Touch [OK]. The settings of the previous output job will be recalled on the Basic Screen. Do you want to cancel this operation? % Touch [Cancel]. Position original(s), then press [Start]. 14-16 bizhub PRO 920...
  • Page 393: Displaying Screen For Operation Guide (Help Mode)

    Copier Basic, Copier Appli, Scan/Box, and Job List information can also be displayed from each screen by pressing [Help] on the control panel. To display Help Screen Press [Help] on the control panel. The Help Screen will be displayed. bizhub PRO 920 14-17...
  • Page 394 Advanced Information Touch the desired menu key to display specific information. Touch upper/lower arrow key to scroll, if provided. Touch [Exit]. The Basic Screen will be restored. 14-18 bizhub PRO 920...
  • Page 395: Adjusting Response Time Of Touch Keys (Accessibility)

    The Accessibility LED lights in green to indicate that the specified re- sponse time is set on the machine. To deactivated this function, press [Accessibility] for one second or longer. The Accessibility LED goes off, and normal response time will be re- stored in touch key operation. bizhub PRO 920 14-19...
  • Page 396: Adjusting Touch Panel Contrast (Contrast)

    (Utility Screen>6 Administrator Setting>1 System Setting>9 LCD Back- light Setting). For details, see page 4-55 of POD Administrator’s refer- ence. To Adjust Contrast Turn the Contrast adjustment dial on the control panel. – To increase the contrast, turn the dial clockwise. 14-20 bizhub PRO 920...
  • Page 397 Advanced Information – To decrease the contrast, turn the dial anticlockwise. bizhub PRO 920 14-21...
  • Page 398: Controlling Copier From Browser (Remote Panel)

    0 JavaScript must be active. 0 The popup menu such as paper misfeed prompt will not be updated au- tomatically. After a long period of inactivity, click [Reload] at the upper corner of the screen to display the current status. 14-22 bizhub PRO 920...
  • Page 399 Start the web browser, then enter the IP address of the main body in the address bar. The Web Utilities screen will be displayed. Click [Remote Panel] on the Web Utilities screen. The browser displays control panel and touch panel screen currently displayed on the machine. bizhub PRO 920 14-23...
  • Page 400 Advanced Information Using a mouse and keyboard, perform job operation. 14-24 bizhub PRO 920...
  • Page 401 Index...
  • Page 402 Auto Start mode ......10-18 Combine Originals tab ..... 2-9 Auto Zoom ......9-13 9-24 Combine Pages ......10-6 Automatic Exposure Selection (AES) 9-6 Consumables ........1-8 Contact service representative ..5-2 Background whiteness ....9-6 Contrast ........14-20 15-2 bizhub PRO 920...
  • Page 403 Copying in full size mode ....9-23 Copying Mixed Size Originals ..10-12 Face Up ......... 12-9 Copying Non-Standard Size Originals Features of the bizhub PRO 920 ..8-2 ............10-21 Feed paper count ......6-4 Copying onto transparent films ... 11-21 Feeding Single Original from ADF ..
  • Page 404 ......12-33 Memory Full message ....5-10 Large Capacity Unit LU-403/LU-404 Memory indicator ......2-9 ............2-10 Memory Overflow ......5-10 Laser Safety ........1-9 Message area ........2-9 Left side door ........2-3 15-4 bizhub PRO 920...
  • Page 405 Preset Zoom ........9-24 Output Z-Folded Copies ....12-21 Preventive Maintenance ....6-6 Ozone Release ....... 1-10 Primary (main) tray ....2-11 2-14 Printer total count ......6-4 Page Interval function ....11-48 Program Image Overlay ....11-87 bizhub PRO 920 15-5...
  • Page 406 Top Bind key ........ 10-11 Simplex/Duplex ......9-29 Total count ........6-4 Simplex/Duplex key ......2-9 Total counter ........2-4 Single Feed ........10-16 Trash basket ..2-13 2-15 2-17 2-19 Sleep ..........2-25 Tray/ Exit Tray Capacity ....3-4 15-6 bizhub PRO 920...
  • Page 407 When moving the machine ....1-8 Work table ........2-3 XY Zoom (Individual) ...... 9-24 XY Zoom (proportional) ....9-24 Z Folding Unit ZU-602 ....2-17 Z-Fold .......... 12-21 Z-Folded ........10-14 Zoom ..........9-23 Zoom key ......... 2-9 bizhub PRO 920 15-7...
  • Page 410 G This manual was printed using 100% post-consumer recycled paper. G This manual was printed with soy ink. http://konicaminolta.com Copyright Printed in China 2006 57GE97052F 2006. 6...

Table of Contents