4. SERVICE TOOLS
B. Import of data
Note
• When replacing the parameter board (PB), be sure set the serial number (see "10.9.3 Serial No.
input") and the address (see "4.4.4 Initial setting") of the main body before importing data.
(1) Procedure
Step
1
Enter the Tech. Rep. mode.
Note
• The use of this function is available only when you enter the Tech. Rep. mode.
2
Access the "Extension for maintenance" function from Web Utilities of the main body and enter the
[Machine setting data Import/Export] mode.
3
"Machine setting data Import/Export screen"
Click [Browse...] of the import, specify the folder of the PC into which the backup data is stored and
press the [Submit...] key.
4
Make sure that the data has been written correctly and turn OFF and ON the main power switch
(SW1).
196
1
Field Service Ver2.0 Aug.2005
Operation