10. TECH. REP. MODE
10.3.8
Printer regist loop adjustment (timing adjustment)
Adjust the paper loop amount in the registration roller section to remove paper skew and wrinkle, or paper jam-
ming in the registration section.
A. Procedure
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [Machine Adjust] key.
3.
A sub menu appears on the right side of the screen.
Press the [Timing Adjustment] key on the sub menu.
4.
"Timing adjustment mode menu screen"
Press the [Printer Regist Loop Adjust] key.
5.
"Printer regist loop adj. screen"
Press the [Next] or the [Back] key to select the item you adjust, and press the [Test Copy] key.
The item changes as follows:
Tray Side1 → Bypass Side1 → Side2 LS460 → Side2 LS290 → Tray Side1 Thick → Bypass Side1 Thick
→ Side2 Thick LS460 → Side2 Thick LS290
6.
Set the copy according to the item that has been adjusted and press the Start button to output a test pat-
tern (No. 16).
7.
When the trouble is not solved, press the [Adjustment] key.
8.
"Printer regist loop adj. screen"
Enter a value through the numeric keys and press the [Set] key.
Setting range: -10 (smaller) to +10 (larger) 1 step = 1ms
(The setting range for the Tray Side1 and Tray Side1 Thick is: -5 to +5.)
9.
Repeat the steps 5 to 8 until an appropriate value is obtained.
290
Field Service Ver2.0 Aug.2005