Replacing The Transfer Roller Unit - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
3.4.4

Replacing the transfer roller unit

A. Periodically replacing parts/cycle
• Transfer roller unit: Every 120,000 prints
B. Removal procedure
1. Open the right door.
[1] [2]
C. Reinstall procedure
[1] [2]
3. Close the right door.
2. Unlock the lock levers [1] of the
[1]
3. Holding onto the lock levers [1] (at
A02FF2C003DA
1. Holding onto the lock levers [1] (at
[1]
2. Lock the lock levers [1] (at two
NOTE
• Make sure that the levers are locked
A02FF2C004DA
3. Periodical check
transfer roller unit (at two places).
two places), remove the transfer
roller unit [2].
two places), mount the new transfer
roller unit [2].
places).
in position both at front and rear.
17