Positions Stapling Pitch Adjustment (Fs-604) - Konica Minolta bizhub PRO 920 Service Manual

Field Service Ver2.0 Aug.2005

10.13.12 2 positions stapling pitch adjustment (FS-604)

Adjust the staple intervals for the staple mode.
A. Procedure
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [Finisher Adjust] key.
3.
A sub menu appears on the right side of the screen.
Press the [2 Positions Stapling Pitch Adj.] key on the sub menu.
4.
"2 position staple pitch adjustment screen"
Press the [Test Copy] key.
5.
Press the Start button to output the test pattern (No.16).
6.
Check the interval "a" between the staples.
Standard value a: 120 ± 6 mm
7.
When the value is not within the standard value, press the [Adjustment] key.
8.
"2 position staple pitch adjustment screen"
Enter a value through the numeric keys and press the [Set] key.
Setting range:120 to 160 1 step = 1 mm
9.
Repeat steps 4 to 8 until the standard value can be obtained.
10. TECH. REP. MODE
a
15sjf3c103na
427