Konica Minolta bizhub PRO 920 Service Manual page 130

3. PERIODIC CHECK
[1]
[5]
98
[2]
[3] [4]
57gaf2c303na
Field Service Ver2.0 Aug.2005
7.
Remove the E-ring [1] and then remove the feed
input gear [2].
Note
• The shaft [3] is inserted with the pin [4]. Be
careful that the pin does not get lost.
• When installing the paper feed input gear, be
sure to set the stopper [5] to the pin.
8.
Reinstall the above parts following the removal
steps in reverse.