Field Service Ver2.0 Aug.2005
3.13 Maintenance procedure of the paper feed section
3.13.1
Cleaning the paper dust removing brush (Tray 1, 2, 3)
A. Periodic cleaning cycle
•
Paper dust removing brush: Every 500,000 prints
B. Procedure
[1]
[1]
[2]
57gaf2c115na
[2]
57gaf2c116na
1.
Pull out the paper feed tray. (See "6.3.18 Remov-
ing/reinstalling the paper feed tray 1 and 2,"
"6.3.20 Removing/reinstalling the paper feed tray
3.")
2.
Release the stoppers [1] at 2 places, and remove
the paper dust removing brush [2].
3.
Clean the cleaning section [2] of the paper dust
removing brush [1] with a blower brush.
4.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
85