Telephone No; Serial No. Input - Konica Minolta bizhub PRO 920 Service Manual

10. TECH. REP. MODE
10.9.2

Telephone No.

Set the telephone number and FAX number of the service center displayed when malfunction occurs.
A. Procedure
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [System Input] key.
3.
A sub menu appears on the right side of the screen.
Press the [Telephone No.] key on the sub menu.
4.
"Customer support TEL/FAX setting screen"
Press either the [Service Center Tel (16)] or the [Service Center Fax (16)] key you want to set.
5.
Enter the telephone number or FAX number you register through the numeric keys.
NOTE
• When a number is less than 16 digits, be sure to use hyphen etc to fill up the blanks.
6.
Press the [OK] key to register data.
Press the [Cancel] key to cancel the setting you entered.
10.9.3

Serial No. input

Set and display the serial number of the main body and options.
Caution
• Never change the serial number of the main body. Otherwise, the fusing temperature abnormality
may occur.
A. Procedure
1.
Enter the Tech. Rep. mode.
2. "Tech. Rep. mode menu screen"
Press the [System Input] key.
3.
A sub menu appears on the right side of the screen.
Press the [Serial No.Input] key on the sub menu.
4.
"Serial number setting mode screen"
Press the key for the option you want to set, and enter the serial number through the numeric keys.
5.
Press the [OK] key to register data.
Press the [Cancel] key to cancel the setting you entered.
Note
• When the input data is incorrect, a notice screen appears. Press the [OK] key to close the screen
and input data again.
390
Field Service Ver2.0 Aug.2005