Konica Minolta bizhub PRO 920 Service Manual page 85

Field Service Ver2.0 Aug.2005
[2] [3]
[1]
[2]
[1]
[4]
[5]
57gaf2c066na
5.
Remove the C-clips [3], 1 each, from the shaft [2]
of the charge cleaning unit [1].
6.
Turn over the charge unit [4] and remove the 2
charge cleaning units [1].
7.
Remove the collar [5] from the shaft [2] of the
charge cleaning unit [1] that has been removed.
Note
• Be careful that the collar inserted into the
shaft of the charge cleaning unit does not
drop off and get lost.
• When installing the charge cleaning unit, be
sure also to install the collar without fail.
• When installing the charge cleaning unit, be
sure to install it while taking note of its direc-
tion.
8.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
53