Konica Minolta bizhub PRO 920 Service Manual page 141

Field Service Ver2.0 Aug.2005
[2] [5]
[7] [10]
[3]
[4] [1]
[8]
[9] [6]
57gaf2c196na
4.
Remove the connector [1].
5.
Remove the C-clip [2] and then remove the verti-
cal conveyance clutch /2 (CL10) [3].
Note
• When installing CL10, be sure to set the stop-
per [4] to the guide [5].
6.
Remove the connector [6].
7.
Remove the C-clip [7] and then remove the verti-
cal conveyance clutch /1 (CL9) [8].
Note
• When installing CL9, be sure to set the stop-
per [9] to the guide [10].
8.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
109