Konica Minolta bizhub PRO 920 Service Manual page 186

3. PERIODIC CHECK
[3] [1] [2]
[6] [7]
[9]
[8]
154
[3]
[5] [4]
[10]
57gaf2c006na
Field Service Ver2.0 Aug.2005
8.
Remove the screw [1] and then remove the lamp
fixing plate cover [2].
9.
Remove the 2 screws [3] and then remove the
lamp fixing plate /Fr [4].
10.
Pull out the fusing heater lamp /1 (L2) [5] and fus-
ing heater lamp /2 (L3) [6] in the arrow-marked
direction [7] for removal.
Note
• When reinstalling each of the fusing heater
lamps, check to see if either end of each lamp
is set in the fitting holes of the lamp fixing
plates /Fr [4] and /Rr [8].
• Be sure to install each of the fusing heater
lamps so that the manufacturer mark [9]
comes to front side.
• After each of the fusing heater lamps is
installed, check to see if it is in touch with the
inner face of the fusing roller /Up [10].
11.
Reinstall the above parts following the removal
steps in reverse.