Error Code List - Konica Minolta bizhub PRO 920 Service Manual

Field Service Ver2.0 Aug.2005

10.11.14 Error code list

Error code
K00_00 Connection NG (Cannot connect from the modem,
timed out).
K00_01 No response (After connection, no start telegram
from the center detected).
K00_02 Copying. Could not be written in non-volatile mem-
ory, and line disconnected.
K00_03 Center ID mismatch.
K00_04 Serial number mismatch.
K00_05 Syntax error (when receiving undefined commands
or parameters).
K00_06 Received a write order for an unwritable item.
K00_07 Unread item error.
K00_08 Signal reception time out after a response detection
(after the start telegram shuttled).
K00_09 Already registered serial number.
K00_10 Communication error occurred because of the car-
rier OFF (NO CARRIER detected in the modem).
K00_11 Dialtone (NO DIALTONE) detected in the modem.
K00_12 Busy signal (BUSY) detected in the modem.
K00_13 NO ANSWER detected in the modem.
K00_14 Telegram error (irregular telegram received in
response to the telegram you sent).
K00_15 Serial number not registered in the center (4 x 40
telegrams received).
K00_16 Errors not defined in the above -00 to 15 (last 2 dig-
its).
K00_17 Telephone number you must call was not registered.
K01_00 DSR turned OFF or remains turned OFF.
K01_01 Error on creating a message queue.
K01_02 Error on generating a task.
K01_03 Error on sending a message.
K01_04 Error on receiving a message.
K01_05 Received an error (NG) from the timer task.
K02_01 Modem initialization NG.
K03_00 Center call evacuation buffer is full. Cannot evacuate
any more.
K05_90 Because of memory shortage, unable to secure
enough area for sending a mail.
Error
10. TECH. REP. MODE
Solution
Redial and wait for re-reception.
Redial and wait for re-reception.
Confirm the center ID.
Confirm the serial number.
Redial.
Redial.
Redial.
Redial.
Redial.
Redial.
Retry standard times, and redial.
Redial.
415