Konica Minolta bizhub PRO 920 Service Manual page 239

Field Service Ver2.0 Aug.2005
(2) When using the USB cable
Preparations are made of the following when a connection is made.
• PC which firmware have been copied.
• UBS cable
1) Procedure
Step
1 Turn OFF the power of the main body.
2 Turn OFF the power of the PC.
3 Connect the UBS cable [2] to the USB port [1] of the PC.
4 Connect the UBS cable of the PC to the ISW connector of the main body.
[2]
Operation
5. FIRMWARE VERSION UP
[1]
57gaf2c278na
57gaf2c275na
207