• This table lists the optimum setting values by paper brands checked for paper through by Konica Minolta. For other brands, it is scheduled that information is provided in due course upon completion of the paper through check.

Paper weight

50 to 61 g/m

Paper category

Paper setting at the Utility mode

Line speed (mm/s)

Fusing temp. index (°C)

Smooth paper

(Smoothness: over 100sec)

(A separation performance is not securable.)

Paper setting at the Utility mode

Line speed (mm/s)

Fusing temp. index (°C)

Fine quality paper

(Smoothness: 50 to 100sec)

Paper setting at the Utility mode

Line speed (mm/s)

Fusing temp. index (°C)

PPC paper

(Smoothness: 20 to 50sec)

Paper setting at the Utility mode

Line speed (mm/s)

Fusing temp. index (°C)

Rough paper

(Smoothness: 5 to 20sec)

(A separation performance is not securable.)

1. Line speed and fusing temperature are decided by setting the paper type from the "Utility mode."

2. Smoothness is a value measured by the Beck smoothness testing machine stipulated in the ISO 5627:1995, and the smaller the value, the coarser the paper grain. When the paper is not listed in this table and the setting condition of which can not be found, obtain the smoothness from the paper manufacturer and select the type of paper according to the value

of smoothness.

Note

• When using high quality printing paper, be sure to select a setting direction in which there occurs less amount of curling after printing.

• Marked with *: Paper the classification of which of smoothness or weight has been changed from the viewpoint of performance.

62 to 71 g/m

Exclusive A

460

-10

Disable

Exclusive E

Recycled

460