List Of Combinations Of E-Mail Cs Remote Care And Mail Remote Notification System - Konica Minolta bizhub PRO 920 Service Manual

10. TECH. REP. MODE

10.11.3 List of combinations of E-Mail CS Remote Care and Mail remote notification system

To change a combination of E-Mail CS Remote Care and Mail remote notification system, refer to this table to
configure the software switch setting or the mail account setting.
Case Mail remote
notification
system
1
2
3
4 —
5 —
*1 Tech. Rep. mode - Software Switch Setting: 15-5 (CS Remote Care function ON, 0=OFF, 1=ON)
*2 Tech. Rep. mode - Software Switch Setting: 16-7 (NIC selection of E-Mail CS Remote Care, 0=IP NIC,
1=main body NIC)
*3 Mail remote notification system and CS Remote Care using the main body NIC share the same mail account
*4 Mail remote notification system and CS Remote Care using the IP NIC use separate mail accounts
396
E-Mail CS E-Mail CS
Remote Care Remote Care
using the IP NIC
using the main
body NIC
—
—
— —
—
—
Field Service Ver2.0 Aug.2005
Setting item
"Use the mail remote notification
system" of the main body NIC's
Web utility
"Tech. Rep. mode - Software
Switch Setting": 15-5 (*1)
"Tech. Rep. mode - Software
Switch Setting": 16-7 (*2)
"Use the mail remote notification
system" of the main body NIC
Web utility
"Tech. Rep. mode - Software
Switch Setting": 15-5 (*1)
"Tech. Rep. mode - Software
Switch Setting": 16-7 (*2)
"Use the mail remote notification
system" of the main body NIC
Web utility
"Tech. Rep. mode - Software
Switch Setting": 15-5 (*1)
"Tech. Rep. mode - Software
Switch Setting": 16-7 (*2)
"Use the mail remote notification
system" of the main body NIC
Web utility
"Tech. Rep. mode - Software
Switch Setting": 15-5 (*1)
"Tech. Rep. mode - Software
Switch Setting": 16-7 (*2)
"Use the mail remote notification
system" of the main body NIC
Web utility
"Tech. Rep. mode - Software
Switch Setting": 15-5 (*1)
"Tech. Rep. mode - Software
Switch Setting": 16-7 (*2)
Value Remark
Use
1 (*3)
1
Use
1 (*4)
0
Use
0 —
0
Do not
use
1 —
1
Do not
use
1 —
0