Removing/Reinstalling The Write Unit - Konica Minolta bizhub PRO 920 Service Manual

Field Service Ver2.0 Aug.2005
6.3.16

Removing/reinstalling the write unit

Caution
• Be absolutely sure not to turn on the writing section with it displaced from its regular position.
• Be absolutely sure not to remove the writing section cover. If laser beams get in your eyes, you
may suffer loss of sight.
• After turning off the main power switch (SW1) or the power switch (SW2), be absolutely sure not to
remove the writing section for about 2 minutes.
A. Procedure
[1]
[3]
[2] [3]
57gaf2c169na
[1]
[2]
57gaf2c170na
1.
Remove the right cover /Up. (See "6.3.3 Remov-
ing/reinstalling the right cover /Up.")
2.
Remove the connector [1].
3.
Remove the screw [2] and then remove the inter-
nal cooling fan /4 assembly [3].
4.
Remove the connector [1].
5.
Remove the wiring harness from the edge saddle.
6.
Remove 4 screws [2] and then remove the Writing
section cover [3].
6. OTHERS
255