Konica Minolta bizhub PRO 920 Service Manual page 259

Field Service Ver2.0 Aug.2005
(3) Type 3: FW user => FW password => SITE host
This is a type that requires the authentication to the proxy server itself when accessing the outside.
The information of the server you want to access, the user name and password of the proxy server (F/W) are
necessary.
In case of the user name and the password of the proxy server are required when accessing the outside through
the proxy server, this proxy authentication is likely to be used.
Command
Command Parameter
USER FW user
PASS FW password
SITE host
USER user
PASS password
(4) Type 4: FW user => FW password => USER user@host
This is almost the same as the type 3, except for the exchange of commands while in authentication.
When all the settings are made correctly and no communication is available with type 3 authentication, apply this
type.
Command
Command Parameter
USER FW user
PASS FW password
USER user@host
PASS password
D. Remarks
For fwtk2.1 (for Unix) and Black Jumbo Dog (for Windows), the type 1 authentication is used. For most of the
proxy servers, the type 1 authentication is used. When the authentication type of the proxy server is not known,
you are recommended to make settings in type 1 authentication as a temporary measure.
Reply Code
331 Transmit the user name of the proxy server
230 Transmit the password for the user name above
ftp expanded function, Transmit the program server address
defined for each server
331 Transmit the user name of the program server
230 Transmit the password for the user name above
Reply Code
331 Transmit the user name of the proxy server
230 Transmit the password for the user name above
331 Transmit the user name of the program server and the
program server address
230 Transmit the password for the user name above
5. FIRMWARE VERSION UP
Description
Description
227