Konica Minolta bizhub PRO 920 Service Manual page 430

10. TECH. REP. MODE
D. NIC selection for E-Mail CS Remote Care
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [System Input] key.
3.
"Sub menu screen"
Press the [Software Switch Setting] key.
4. "Software switch setting mode screen"
Set "16" with the DIPSW number.
Set "7" with the DIPSW bit number.
5.
Set the bit data to the NIC you use.
On (1): Use the main body NIC
Off (0): Use the IP NIC (default)
6.
Press the [Return] key to finish the configuration.
E. CS Remote Care function selection (E-Mail/Phone line modem)
1.
Enter the Tech. Rep. mode.
2. "Tech. Rep. mode menu screen"
Press the [CS Remote Care] key.
3.
"Sub menu screen"
Press the [CS Remote Care] key
4.
"CS Remote Care setting screen"
Select the key for the function you use.
01 E-Mail: Use the E-Mail CS Remote Care
02 Modem: Use the Modem CS Remote Care
5.
Press the [No. Code] key.
6.
Enter the No. code* with the numeric keys.
7.
Press the [No. Code] key.
8.
Press the [Detail setting] key.
9.
"Setting menu screen"
Press the [Date/Time Setting] key.
10.
"Date and Time setting screen"
Enter the date with the numeric keys, and press the [Set] key.
11.
Enter the month with the numeric keys, and press the [Set] key.
12.
Enter the year in 2 digits with the numeric keys, and press the [Set] key.
13.
Enter time with the numeric keys, and press the [Set] key.
14. Press the [Time Zone] key.
15.
Enter the time zone with the numeric keys, and press the [Set] key.
16.
Press the [OK] key to return to the "Setting menu screen."
* Enter the No. code that is assigned in advance.
398
Field Service Ver2.0 Aug.2005