Konica Minolta bizhub PRO 920 Service Manual page 251

Field Service Ver2.0 Aug.2005
Step
7 "Proxy Server Setting screen"
Set the proxy server.
When using no proxy server (fire wall), proceed to the step 9.
Enable Proxy
Proxy Server Type
Proxy Server IP Address
Port Number
User name on the Proxy
Server
Password for the Proxy Server When selecting the type 1 or type 2 in "Proxy Server Type" above
8 After completion of entry, click [Next] and then after checking the set items in the setting check
screen, click [Next]. However, if there is an input error, click [Back] following the message shown in
red and then re-set the item.
Operation
Select the following:
When using no proxy: "no."
When using ftp proxy: "Use ftp proxy."
When using http proxy: "Use http proxy."
When selecting "Use ftp proxy" in "Enable Proxy," then select a
proxy server type from among the below.
Type 1: "User user@host"
Type 2 "OPEN host"
Type 3: "FW user => FW password => SITE host"
Type 4: "FW user name => FW password => User user@host"
Note
• For types 2, 3 and 4, no guarantee is made.
• For authentication of proxy server, see "5.3.8 Authenti-
cation of the proxy server in the Internet ISW."
When using the proxy server, set the IP address of the proxy
server.
When using the proxy server, set the number of the port that
uses the proxy server.
When selecting the type 1 or type 2 in "Proxy Server Type" above
set the account of the proxy server.
set the password of the proxy server.
5. FIRMWARE VERSION UP
219