Field Service Ver2.0 Aug.2005
3.5.3
Replacing the dust-proof filter /1, /2 and /3
A. Periodically replaced parts/cycle
•
Dust-proof filter /1: Every 3,000,000 prints
•
Dust-proof filter /2: Every 3,000,000 prints
•
Dust-proof filter /3: Every 3,000,000 prints
B. Procedure
[3]
[4]
[2]
[2]
[5]
[1]
[2]
57gaf2c188na
[1]
[3]
57gaf2c189na
1.
Open the bypass tray [1].
2.
Remove the screws [2], 1 each, and then remove
the filter covers /2 [3], /1 [4] and /3 [5].
Note
• When installing the filter covers /1, /2 and /3,
be sure to push each of them in the arrow-
marked direction before installing them.
3.
Remove the dust-proof cover /3 [2] from the filter
cover /3 [1].
Note
• When installing the dust-proof filter /3 [2], be
sure to check to see if it is set in the catch [3].
3. PERIODIC CHECK
33