Konica Minolta bizhub PRO 920 Service Manual page 34

1. SYSTEM CONFIGURATION
B. Configuration for optional device connection
Note
• For machines equipped with ZU-601/602, the function of PK-503/504/505 is not available when PI-
501 is not equipped.
• Any combination other than those listed below is not available.
No.
1
2 FS-509/604
3 FS-509/604
4 FS-604
5 FS-509/604
6 FS-604
7 FS-604
8 FS-604
9 ZU-601/602
10 ZU-601/602
11 ZU-602
12 ZU-601*2
13 ZU-602*2
14 ZU-602
15 ZU-601*2
16 ZU-602*2
*1 Paper fed from PI-501 cannot be punched.
*2 Paper fed from PI-501 is punched by PK-503/504/505. And paper fed from those other than PI-501 is
punched by ZU-601/602.
2
1
Combinations for finishing
FS-509/604
PK-504/505
TU-501 + MK-707
PI-501
PI-501
PK-503/504/
505
PI-501 PK-503/504/
505
FS-509/604
FS-509/604
FS-604
FS-509/604 PI-501
FS-509/604 PI-501
FS-604 PI-501*1
FS-604 PI-501
FS-604 PI-501
PI-501
PK-503/504/505
TU-501 + MK-707
TU-501 + MK-707
TU-501 + MK-707
PI-501*1
TU-501 + MK-707
PK-504*2
PK-503/505*2
TU-501 + MK-707
PK-504*2 TU-501 +
MK-707
PK-503/505*2 TU-501 +
MK-707
Field Service Ver2.0 Aug.2005
AC power to be
connected to
External (TU-501)
External (TU-501)
External (TU-501)
External (TU-501)
External (TU-501)
External (TU-501)
External (TU-501)