Konica Minolta bizhub PRO 920 Service Manual page 128

3. PERIODIC CHECK
[5]
[6]
[1] [2]
[9]
96
[3] [11] [4]
[8]
[7]
[10]
57gaf2c133na
Field Service Ver2.0 Aug.2005
9.
Remove the spring [1].
10.
Remove the screw [2] and then remove the lock
lever [3].
Note
• When installing it, be sure to push the lock
lever [3] in the arrow-marked direction [4] and
check to see if it returns to the original posi-
tion.
11.
Remove 2 E-rings [5] and then remove the bear-
ing [6].
12.
Remove the E-ring [7] and then remove the bear-
ing [8].
13.
Remove 3 screws [9] and then remove the adjust-
ment plate [10].
14.
Remove the pre-registration roller[11].
15.
Reinstall the above parts following the removal
steps in reverse.