Field Service Ver2.0 Aug.2005
10.14 Administrator setting
Important
• The use of the [Enhance Security Mode] in the [Administrator Setting] in the utility mode is limited
only when the administrator authentication is set to "Authentication On."
10.14.1 Administrator authentication
To enhance security of the [Administrator Setting] of the utility mode, configure the setting so that a password is
required to enter the [Administrator Setting].
A. Procedure
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [Administrator Setting] key.
3.
A sub menu appears on the right side of the screen.
Press the [Administrator Authentication] key.
4.
"Manager Authentication Setting screen"
Press the [Authentication On] key and press the [OK] key to confirm.
5.
To disable the authentication setting, press the [Cancel] key or [Authentication Off] key.
10.14.2 Administrator password setting
Configure a password to enter the [Administrator Setting] of the utility mode.
The administrator password can also be set in the [Administrator Setting] of the utility mode.
Note
• The selection of the [Administrator Password Setting] key is limited only when the [Administrator
Authentication] is set to "Authentication On."
• Do not use anything easily guessed by others such as your name, birthday.
A. Procedure
1.
Enter the Tech. Rep. mode.
2.
"Tech. Rep. mode menu screen"
Press the [Administrator Setting] key.
3.
A sub menu appears on the right side of the screen.
Press the [Administrator Password Setting] key.
4.
"Manager Authentication Setting screen"
Enter an 8-digit password with alphanumeric keys.
Default is "00000000."
5.
Press the [OK] key to register data.
Press the [Cancel] key to cancel the setting you entered.
10. TECH. REP. MODE
429