Usage Of The Iswtrns - Konica Minolta bizhub PRO 920 Service Manual

Hide thumbs Also See for bizhub PRO 920:

Table of Contents

5. FIRMWARE VERSION UP

Usage of the ISWTrns

A. Installation of the USB driver (Windows2000/XP)

When a connection is made between the PC and the main body with a USB cable, the installation of the USB

driver is automatically started by the plug-and-play. However, this may result in the installation of the Windows

USB driver (USBPRINT.SYS) and be sure to set the USB driver following the steps given below.

(1) Procedure

From the screen below, select "Install from a list or specific location," and then click [Next].

In the "Please choose your search and installation options" screen, select "Don't search. I will choose

the driver to install," and then click [Next].

Select the UBS driver in the driver selection screen and click "Next" to start installation.

Driver name: KONICA MINOLTA 1050/1050P/920 USB Driver for ISW

• The USB driver is common to 1050/1050P and 920. So, when the UBS driver of 1050/

1050P has been already installed, the machine type of 920 is not displayed.

When the "Completing the Found New Hardware Wizard" screen is displayed, click [Finish] to exit the

installation.

Check the "Device Manager screen" to see if the USB driver has been correctly installed.

Driver name: KONICA MINOLTA 1050/1050P/920 USB Driver for ISW

• The USB driver is common to 1050/1050P and 920. So, when the UBS driver of 1050/

1050P has been already installed, the machine type of 920 is not displayed.

Field Service Ver2.0 Aug.2005

Table of Contents