Removing/Reinstalling The Original Glass - Konica Minolta bizhub PRO 920 Service Manual

6. OTHERS
6.3.7

Removing/reinstalling the original glass

A. Procedure
[5]
[1] [3]
[2]
[3]
[4]
242
[8]
[7]
[4] [9] [6]
57gaf2c148na
[1]
[2]
57gaf2c149na
Field Service Ver2.0 Aug.2005
1.
Remove 2 screws [1] and then remove the original
stopper plate /Lt [2].
2.
Remove 3 screws [3] and then remove the original
stopper plate /Rr [4].
3.
Remove 2 screw caps [5], remove the 2 screws
[6] and then remove the upper cover /Rt2 [7].
4.
Remove 2 screws [8] and then remove the upper
cover /Rt1 [9].
5.
Loosen the 2 screws [2] of the original glass guide
/Rt [1] and slide it to the right.
6.
Remove the original glass [3].
Note
• When installing the original glass, be sure to
press the original glass guide /Rt [1] against
the original glass [3] and fasten it after install-
ing the original glass.
7.
Reinstall the above parts following the removal
steps in reverse.
Note
• When reinstalling the original glass, be sure
that the shading correction plate (white) [4] is
on the upper side of the glass.