Transfer/Separation Charger Unit - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006
6.1.5

Transfer/separation charger unit

A. Transfer guide plate/transfer assist home sensor assembly
(1) Positions from which the screws are not allowed to be removed
• 5 attaching screws of the transfer guide plate
• 2 attaching screws of the transfer assist home sensor assembly
[1] Screws not allowed to be removed
[2] Screws not allowed to be removed
(2) Reason of prohibition
The transfer guide plate decides the approach angle of paper against the transfer position and the displacement
of the installation position may result in poor transfer. Accordingly, the attaching screws of the transfer guide
plate are not allowed to be removed.
The transfer assist home sensor (PS37) detects the starting point to drive the transfer assist sheet assembly and
the displacement of this position may result in poor transfer or damage to the drum. Accordingly, the attaching
screws of the transfer assist home sensor assembly are not allowed to be removed.
[4]
[3]
[2]
[1]
[3] Transfer assist home sensor assembly
[4] Transfer guide plate
6. OTHERS
1050fs2222c
245